G1 Web certification, mainly for some enterprises and Internet cafes certification, need to give a specific device account password, so that a specific device users can access the Internet, the specific operation as shown in the following figure:
First Step : Connecting Lines
Step Two: Enter the Setup authentication interface
Third Step : Authentication Infrastructure Settings
Fourth Step : Add An authenticated user's account number and password
Fifth Step : Open the Web page, enter the authenticated username and password Authentication online
From the external network to a network cable into the router WAN port, and then from the router above the LAN port to a network cable to the computer, completed in the browser entered the login IP address into the management settings interface.
In the browser address bar Enter the
login IP address , enter the default account and password:admin can enter to the router's setup interface.
After entering the interface select "
Web
authentication ", through "
Basic Set up Web authentication." "To set
1. Authentication basic settings, first "
open web authentication ", and then " set no traffic time to log back " and " Authentication page Configuration ", you can through the " New host "to set up the authentication-free host, the setup is complete and click" OK "to save.
2. New Unrestricted host settings, fill in the host's "
MAC
address ", modify "
remarks " click "
Add " and "
OK "
3. Authentication interface setting, select "
Authentication page Configuration ", click "
Configure Page ". Set "
public title ", "
post content "
Certified account password in the "
WEB
authentication "-"
User Management -" Add Users "Inside settings, set a good username and password, click" OK "to save. "
Open any Web page in a browser and jump to the Web authentication page
Enter the account and password in the red box, click on the "
Certified Internet " button to access the Internet.
As above: G1 Web authentication settings are complete