Tengda Router Setup Guide

What is the home router setup step?

Routers are the main node devices of the Internet. Routers determine the forwarding of data through routing. The forwarding strategy is called routing (routing), which is also the origin of the router name (router, forwarding).

Next, let's take a look at the Tengda Router Setup guide.

For a common computer users, it is not possible to each router are familiar with, even the professionals are not afraid to say all familiar, but the router settings are the same, professional also understand the skills, so no matter what the router can be set up.

Skills:

Each router, in fact, is an "IP" address to share the internet switch,

1, a lot of times, the bottom of the router, will be marked with IP address and login username password and so on, so professionals generally see how to do a glance.

2, of course, the product manual This thing, you have to keep well, the above must clearly describe the operation steps.

3, if said, the instructions are gone, you do not know the router IP address, then Baidu "XX router's default IP and username password" bar. Basically can be found.

Below, to Tengda router as an example to share the actual operation process, I hope to be able to help people in need!

1, first of all, you first connect the equipment, the device typically has 5 network ports, one is a WAN, four is a LAN port, connect your computer network cable to the four LAN port of any one. The network cable connecting mode is connected to the WAN port, which is the blue one in the picture.

2, then power, under normal circumstances your computer is automatically get IP, you will get IP, IP information can be seen in the gateway IP, that is, the IP router.

3, or, can be from the instructions, or the bottom of the router to know the router's default IP and user password. ip:192.168.0.1 username and password are: admin.

4, here, first to ping test the router is connected. Operation: Start-run-input: cmd return-Enter: Ping router IP. As shown in the figure, the connection is normal.

5, if the display is as follows, it does not pass. Do not pass the case, please check: network cable, IP address, whether your computer IP and the same section of the router and other reasons.

6, test connectivity, we open the browser, in the address bar input: 192.168.0.1 and then enter.

7, we enter: User name and password, will eject the wizard, in general, follow the wizard prompts to do the line. Of course, it doesn't matter if you know how to do it. We'll do the next step.

8, here to choose the mode, the general family is through ADSL dial the Internet, choose the right after the next point.

9, then enter your Internet account and password bar. Is the one that the broadband operator gave. One more step.

10, the wizard prompts to complete, click Save can. Under normal circumstances, will be prompted to restart the router, restart it!

11, under normal circumstances, restart the router, you can see the running state of the router, your computer will be able to access the Internet. Then set the wireless SSID and password on it, here to say the encryption way, in the wireless security settings, the proposed choice of WPA/WPA2, you can be more secure and difficult to be cracked and rub nets.

12, but do not exclude the occurrence of this situation, can not be the number of successful dialing. This kind of failure, generally has two possible: the broadband modem's network cable has not received the router. or the Internet account name or password input is not correct, many times the password is capitalized OH.