Tengda (Tenda) e10-How to set up "cloud push" (micro-authentication) function?

First step: Connect the line, set up the router network

Step Two: E10 equipment certification on the cloud Platform

Step three: The setting on the micro-credit public platform

Fourth step: Micro-credit authentication settings on the cloud platform

Attached: Handset client micro-letter authentication Effect

1.1 dial-up Internet User connection (with broadband cat or light cat)

To connect a telephone line or fiber jumper (the finer thread) to the line port of the cat (the smaller one), the cat comes out with a network cable to connect the router's WAN, and then find a short network cable, one to connect the computer, a router to any LAN port.

1.2 network cable directly into the household Connection Mode

Directly to the household network cable connected to the router's WAN, and then find a short network cable, a computer, a router to connect any LAN port.

1.3 set up router networking

Enter 192.168.0.1 on the browser, carriage return. The default login account and password are admin.

(Google Browser is recommended for the best display effect)

According to their actual situation to choose the appropriate dialing methods, and the corresponding information, the following figure used ADSL dialing as an example.

2.1 on E10 equipment click on “ Advanced Settings ” ->“ Advertising Settings ” ->“ The cloud pushes the &rdquo, the concrete steps as follows the figure:

Note: 1. Google Browser is recommended to achieve the best display effect; 2. Cloud Account can contact customer service to obtain; 3. The server address and port are www.cloud-ac.com and 80, respectively.

2.2 Login Cloud Platform, add device authentication

The detailed steps are shown below:

Click to go to the cloud platform

Enter user name and password

Add Shop

Add Device

Pay attention to:“ Device ID” can be e10“ Advertising Settings ” ->“ Cloud Push ” settings, as shown in the following illustration:

The following figure, online status for the “ Green Hook &rdquo, proof device added success

Note: After saving, if the E10/W20E device appears to be authenticated or not certified, please reboot the device.

After the device has been added successfully, the following figure appears:

In the browser input ps://mp.weixin.qq.com/">https://mp.weixin.qq.com/, login micro-trust public platform." As shown in the following illustration:

Fill in the “ of successful application Public platform Accounts ” and “ Password ”

At the developer Center, verify that the server configuration is not enabled.

In automatic reply, add the information of automatic reply (red Word is custom statement, yellow Word is required), and save.

Welcome to use the Tenda WIFI authentication system! Click <a href= "Http://www.cloud-ac.com/userauth?" deviceid=000000000000000000&devicemac=000000000000&usermac=000000000000&openid=000000

0000000000000000000000&tempkey=00000000 > I want to go online </a> can surf the internet

In &ldquo; Certification Settings &rdquo; page selection &ldquo; Micro-Credit certification &rdquo; Way, fill in the previous recorded &ldquo; micro-signal &rdquo;, and upload &ldquo; micro-letter two-dimensional code picture &rdquo, and finally click Save.

If you are prompted to select an Ad template, first click the &ldquo; AD Selection &rdquo; set the appropriate advertising template, and then in &ldquo; Certification Settings &rdquo;&ldquo; Advertising selection &rdquo; inside selection and click &ldquo; determine &rdquo;.

The following figure, the micro-credit authentication setup was successful

Attached: Handset client micro-letter authentication Effect

Note: If you do not have a pop-up browser, please manually open the browser online, will automatically eject the following interface

1. First select the appropriate wireless name, the following page will appear

Click to start the Internet

2. Find or scan the code to pay attention to micro-trust public account

3. In the pop-up message inside click &ldquo; I want to go online &rdquo;

Micro-credit authentication steps have been completed