(Please prepare 2 short wire)
(with ADSL Modem cat ) the telephone line (the relatively thin line) to pick up the cat lines (the relatively small mouth), the cat divided out
A network cable to connect the router's WAN port (blue logo), and then find a short network cable, one to connect the computer, a router
1/2/3 any interface (yellow), wiring mode as follows:
Note : when powered on, the router is working normally with the SYS LEDs flashing, WAN LEDs illuminated steady or blinking, and the computer
The attached 1/2/3 port LED is illuminated steady or blinking. such as wiring after the corresponding 1/2/3 port led does not light or the computer network card icon
A red fork indicates a problem with the line connection, try to check the network cable Connection or change the root network cable to try.
Set the local connection IP address on your computer to "
get IP address automatically "
1, click on the desktop in the bottom right corner of the network icon, open the
Network and Sharing Center
Win8
system gets IP automatically
2
, Click "
Change adapter Settings "
3
, Right click on "
local connection " to select "
Properties "
4
, Double-click
Internet
protocol version
4
(
TCP/IP
)
5
, select "
automatically obtain IP address ", " automatically obtain DNS server Address ", click " OK -" OK ". "
1
, Open the browser , in the browser address bar input:
192.168.0.1 Press ENTER login settings interface.
192.168.0.1
can't open it? Please click this link
2
, Select "
ADSL
dial " in the Settings page, and enter the broadband operator in the "
Broadband username " and "
Broadband password "
(For example: telecommunications, unicom, etc.) to provide broadband user name and password, click "
OK " can be.
After the setup is complete, if the networking
status shows "Connected", you can browse the Web and surf the Internet.