The CATIA software draws the hollow entity font?

Use CATIA software to draw entity words, first of all to write in engineering drawings, and then converted to hollow words, and then the part file under the stretch, specific look at the following step-by-step operation.

1, open Catia Software, a new drawing file;

2, select the text, in the dialog box, enter the hollow entity Word, and then select the font (font is very key), the word High; Save as DXF file, (this file is a universal format)

3, a new part file, named Hollow entity word;

4, open just save the DXF file, will find the font into a hollow, and then copy;

5, in the part document, select the YZ plane, into the sketch, the copy of the hollow word paste into the inside to adjust to the appropriate position;

6, exit the sketch, to stretch, and then add material, get hollow entity word.

Considerations: Font Selection.