The complete steps for wireless laptop Internet access (3) (1)

Through the previous two articles "detail: full steps for wireless laptop Internet access 1) 2)", I think everyone is familiar with the hardware installation and parameter settings of the router for wireless laptop Internet access, as the focus of the network-security issues. How should I set it?

It is important to set the wireless connection of the router in the notebook wireless Internet access procedure.

This step will complete the setting of wireless routers in terms of security and connection, and is the top priority for wireless laptop Internet access. Different routers in this step may be different, but the principle is similar.

Laptop wireless Internet access route security configuration Step 01

Go to "Network Settings" in basic settings, and see Figure 6 ). Note the following:

1. Here you can set an SSID, that is, the name of the Access Point. You can set it at will, but it is best not to use special characters. Use 26 letters and numbers. We recommend that you hide the SSID, that is, disable "SSID broadcast ".

2. Set the wireless mode. You can specify whether to support 802.11G, 802.11b, or hybrid mode. The default value is "hybrid.

3. For some third-party firmware or vrouters with rich configuration options, you can set the wireless mode to AP or bridge, and set it to "Wireless Access Point AP" here.

4. The channel is set to a non-conflicting frequency band, which can be kept by default. If a conflict affects Internet access, set it separately.

Figure 6 set basic wireless network configurations. We recommend that you hide the SSID.