The emergency treatment method of the notebook computer after influent

Now the use of notebook computers is more and more extensive, popularization, if correct use, encounter unexpected situation how to deal with is not everyone knows, when the notebook computer accidentally bubble water, soaking, do not rush to boot, otherwise it will make the damage of the notebook computer more serious, or even cause short-circuit and can not be used again.

The correct handler should be to not boot, and immediately remove the external power cord and battery of the notebook computer, if there are external or swap module parts (such as optical drive, floppy drive, expanded memory, etc.) also please remove as much as possible, the notebook computer body sewage as far as possible, find a soft wet paper towel or soft cloth will gently wipe away the sludge, and try to avoid wear surface, and then use the fan to blow the body and parts dry (do not use hair dryer, lest because the temperature is too high damage to the fuselage), and in the first time to send to professional maintenance organization repair!

The method steps are as follows:

1, the general notebook computer in use after the water, there are two possible conditions: a notebook computer can also be normal use, one is already because of short circuit and automatic shutdown, can not be lit, or continuously reboot. In any case, it is absolutely necessary and essential to remove the associated power device (adapter and battery) The first time when this condition is encountered.

2, most of the current notebook computer, is usually the machine has both hard disk and optical drive. So the second emergency way to do this is to remove your hard drive and the optical drive module after removing the power supply. Because, the hard disk stores your valuable personal data, if the hard disk and the host board connection point also has the liquid infiltration, often will cause the short circuit and causes the hard disk data to damage.

3, Next, please remember to pour out the liquid inside the machine, avoid liquid residue in the machine to cause erosion situation, the correct steps are: 1. The brain screen is placed in a 90° angle with the keyboard; 2. Flip the computer so that the water flows outside the keyboard and LCD screen until it is not flowing; 3. Flip the computer and place it on the desktop, The use of medical cotton ball (or absorbent cloth) suction dry keyboard and LCD screen residual moisture in the gap.

After emptying the liquid that remains in your notebook computer, please wipe the stains off the surface immediately. Just find a soft tissue or soft cloth to gently wipe away the sludge, and try to avoid wear surface, if your notebook computer infiltration of liquid is sugary beverages (such as coffee, black tea and other beverages), but also need to wipe thoroughly.

4, through the above steps can basically prevent the water on the electronic components of damage, the basic computer can be restored to normal state. Of course, if you do not have a little notebook maintenance experience, just perform some of these steps, and then immediately send the laptop to a professional repair center for processing, so more reliable.