The fifth chapter constructs the test environment of s3c6410 Development Board

1.S3C6410 Development Board Introduction:

Different development boards differ mainly in the way of burning embedded systems, the Development Board integrates a variety of high-end interfaces, can help users achieve high-end product design. User-friendly two-time development for various forms of extension applications.

2. Install the Serial debugging tool (minicom):

Serial communication can display the Linux driver output debugging information, of course, the need to install on the PC to accept and send serial data on the program,Ubuntu Linux The following steps are required to install, configure, and test the minicom ( detect if the current system supports USB to serial port, install minicom, Configure minicom, test minicom).

3. Burn the Android system:

In the burning writeAndroidbefore the system needs to useEbootEraseNandflash, the following is a burn-write step (prepare2GBor4GBof theSDcard and insert the reader connectionPC,toSDCard WriteMmc.binand theZimage-sd.bin, Burn writeAndroidbefore theAndroid_fs.tar,Nmc.binand theZimagefiles are copied toSDCard, theSDcard into the Development Board slot and set theSDThe card starts, opens the Development Board, calibrates the screen).

4. Configure a limited network:

Connecting with a network cable requires manually setting the IP, subnet mask, and gateway for the Development Board.

Address: http://www.cnblogs.com/zpm123123

The fifth chapter constructs the test environment of s3c6410 Development Board