The final installation of Linux vmware fails.

Do you want to know the truth about the Linux vmware system? Do you want to know what is inherent in the Linux vmware system? I will only give you a full introduction to the Linux Application Instances of the Linux vmware system.

1 Introduction to Linux vmware tools installation: This is actually a process of installing software. Click vm and select Linux vmware tools install. Then, you can automatically read The cdrom and mount it on your own, but the installation fails, because there is no gz file in the mntt folder, copy the file to the tmp directory, you can use the command:

2: Open the tmp Folder: cd ../cd/tmp unzip the compressed package tar-zxvf Linux vmware tools-6.5.0-188166.tar.gz

3: cd/vmware-tools-distrib
4:/vmware-install.pl

Next, start installation 2. Download and install Amarok: a player in linux. In programming mode, beautiful music is indispensable. http://ftp.ntu.edu.tw/cd../cd/mnt/lscd hgfs/lscd share/ls start installation: Installation Guide unzip your downloaded source package:

Tar xjf amarok-x.y.z.tar.bz2 obviously you should replace the above x. y. z, for example: tar xjf amarok-1.4.9.1.tar.bz2 into the directory you just decompressed the generated, it should be like this amarok-x.y.z, for example: cd amarok-x.y.z please read README file in the directory, it contains some important content you should pay attention to when compiling and installing Amarok.

Check whether you have satisfied the Amarok dependency. If you are not sure, execute the configure script and it will tell you the result. Ubuntu or Debian users can solve the dependency in the following ways:
Sudo apt-get build-dep amarokFedora users use the following method:

Sudo yum resolvedep amarok contains some optional configuration parameters. /configure -- help can view the complete content: -- enable-mysql -- enable-postgresql-with-libgpod Note: To obtain database support, you need to install a database development kit similar to this in your release version: yourdatabase-dev ).

Note: The libgpod must be of the latest version 0.4.2. Use the following command to build and install Amarok :. /configure -- prefix = 'KDE-config -- prefix' makesu-c "make install" if you compile a beta version, consider using the following parameters during compilation :. /configure -- enable-debug = full -- prefix = 'KDE-config -- prefix' is helpful for the bug bugs that causes the crash. You can check the details about the supported configure flags.

Now, the installation is complete. Enter amarok to start your music tour. The installation fails. /configure -- prefix = 'KDE-config -- prefix' (note that it is ''rather than'') Because kde is not installed, so there is no qt, so qt not found cannot be installed.

3. Install qt in Linux:

4. perform the following operations to mount a USB flash drive in Linux:

First, insert a USB flash drive. Second, select actionsusb2.0 9fs in Linux vmware. fashdisk: the VM will switch the USB flash drive between two operating systems. create a usb folder under mut: # mkdir-p/mnt/usb

Then:

 
 

  
  
[root@localhost root]# fdisk -l   
  
  
Disk /dev/sda: 10.7 GB, 10737418240 bytes   
  
  
255 heads, 63 sectors/track, 1305 cylinders   
  
  
Units = cylinders of 16065 * 512 = 8225280 bytes   
  
  
   Device Boot    Start       End    Blocks   Id  System   
  
  
/dev/sda1   *         1        13    104391   83  Linux   
  
  
/dev/sda2            14        33    160650   82  Linux swap   
  
  
/dev/sda3            34      1305  10217340   83  Linux   
  
  
Disk /dev/sdb: 125 MB, 125682176 bytes   
  
  
16 heads, 32 sectors/track, 479 cylinders   
  
  
Units = cylinders of 512 * 512 = 262144 bytes   
  
  
   Device Boot    Start       End    Blocks   Id  System   
  
  
/dev/sdb1   *         1       480    122720+   b  Win95 FAT32   
  
  
Partition 1 has different physical/logical endings:   
  
  
     phys=(502, 15, 32) logical=(479, 7, 1) 
 
 

Because the USB flash drive is in the fat32 format, the mount command is as follows:

 
 

  
  
[root@localhost root]# mount -t  vfat /dev/sdb1 /mnt/usb   
  
  
[root@localhost root]# cd ..   
  
  
[root@localhost /]# cd mnt   
  
  
[root@localhost mnt]# ls   
  
  
cdrom  floppy  hgfs  usb   
  
  
[root@localhost mnt]# cd usb   
  
  
[root@localhost usb]# ls   
  
  
100_3326.jpg  100_3328.jpg  100_3333.jpg  100_3337.jpg  recycler   
  
  
100_3327.jpg  100_3331.jpg  100_3336.jpg  100_3339.jpg   
  
  
[root@localhost usb]# 
 
 

Detach a USB flash drive:

 
 

  
  
[root@localhost root]# umount /dev/sdb1   
  
  
[root@localhost root]#  
  
  
 
  
  
[root@localhost root]# cd ..   
  
  
[root@localhost /]# cd mnt   
  
  
[root@localhost mnt]# ls   
  
  
cdrom  floppy  hgfs  usb   
  
  
[root@localhost mnt]# cd usb   
  
  
[root@localhost usb]# ls   
  
  
[root@localhost usb]#  
 
 

The above describes the Linux vmware system.

1. Easy understanding of Linux VMware Internet access settings
2. Configuration files, commands, or directories related to Linux user concepts
3. Naming rules for Linux software installation packages
4. The fastest way to read every Linux operating system in Linux
5. Fedora vmware starts Linux in ghost computer