The computer does not show the mobile hard drive what's going on
Computer does not show mobile hard disk solution one:
The mobile hard disk should be used in a smooth place, not to be moved when it is being read and written to make it vibrate.
When you unplug the mobile hard drive to strictly follow the procedures: When the hard drive does not read the disk, double-click the "Unplug or eject Hardware" icon in the lower-right corner of the taskbar to "stop" the use of the device in the window that appears, remove the device option from the system, and then unplug the hard drive from the host (remember not to unplug it when the hard drive is read or write). Otherwise very easy to damage the notebook computer hard disk).
Even in the non working state, vibration is the largest killer of the mobile hard drive, this requires users to take a mobile hard drive out when the effective measures to reduce shock (some brands of mobile hard disk in this respect to do a better job, the device itself has taken shockproof measures), it is best to put it in a plastic foam around the box.
Computer does not show the solution of the mobile hard drive two:
Generally speaking, mobile hard disk normal access to the computer, in My Computer or computer disk Management can see the new hard disk symbol, the simplest direct access to my computer can see the new mobile hard disk symbol, the beginning did not see can wait for a refresh of my computer to see, can also be viewed in my Computer Management.
① when encountering a mobile hard drive does not show that we first check that the data cable of the mobile hard drive is connected to the computer with the removable hard drive no, sometimes because it is not plugged in, causing the computer can not identify the situation of mobile hard disk is also more, in addition, when the mobile hard disk USB connection is good, we look at the host USB reception is not good, change the interface to try , the front is not good, change back to try again.
② when the computer host USB interface is available, and the data cable and hardware are firmly connected, the mobile hard disk still cannot show we can try to unplug the host US interface, a little wait to insert again to try, the author encountered many this situation, began to access computer prompts due to equipment access, But in my computer can not see the mobile hard drive letter, repeated Plug and pull a few results have.
③ first to get another computer to try, if normal, is your system, if not normal, is your hard drive or hard disk USB cable problem. First find a good USB cable to try it, or not is the hard drive thing, send repair it, the general hard drive we will not repair.
If it's your own system, you look at it from the Device Manager, move the hard disk before the exception icon, such as the question mark exclamation point, and so on, there will be added new hardware, to find again, and check the computer service is prohibited by the relevant services, it is impossible and do not know where the problem of friends can restore the system to normal ( Such as: A key to restore or reinstall the system, and then take the test, the general problem can be solved. There are still problems ... The last time to see the BIOS set up or restore the BIOS directly to the factory settings, not yet, check your motherboard.
The computer's USB interface itself is not a high-speed interface, while the mobile hard disk is a high-speed hard drive, so even if the power is normal can not show the mobile hard disk area, the computer's USB interface, the general computer will have several USB interface, if the effect is not good, as far as possible using the rear USB It is best to receive a USB interface that matches the removable hard disk.
As a result of the mobile hard drive on the demand for power, if the computer's USB interface power supply, mobile hard drive will be the same light, there will be speed, but due to lack of electricity, can not operate normally, of course, will not display on the computer mobile hard disk letter.