The HP printer prints the WORD, and the system prompts "this document failed to print the local lower-level document" solution

Print the WORD, and the system prompts "this document failed to print the local bottom-layer document". The printer was from HP. After a day, the driver and system were reinstalled several times, but it was useless.

 

Solution

There are several reasons for "document not printed:
1. Poor contact with computer USB plug-in rust or oxide layer or loose! Clear or change other USB ports.
2. Insufficient power supply for the motherboard. This is a little troublesome, but you can use the high-speed printing line USB2.0 to improve.
3. The power supply or AC voltage is too low. Change host power supply or add voltage regulator
4. Viruses prevent printer software drivers or too many boot ports with low computer configurations, resulting in insufficient computer resources. After reinstalling the system or virus, reinstall the printer driver to disable software and commands that are no longer in use.
5. in some operating system versions, if you enable the printer first, the printer will be disabled on the computer (the printer is used offline in the printer attribute). Solution: enable the printer first, and then enable the computer or computer to install a later version of the operating system.
6. If you directly use a USB flash drive or memory card, you 'd better copy it to a local disk first. Try it!
Start with the simplest way to solve the problem! Maybe you can change the USB cable or another method! However, the cause of a print communication error is the following.
Or try: Right-click the printer driver-properties-port-choose what port you use, USB choose USB, select LPT for LPT -- remove the check box before enabling bidirectional support -- application -- OK!