customer's HP ProLiant DL160 Gen9 the server always stops in the Windows window startup interface when the operating system is installed.
Server configuration is HP DL160 Gen9 e5-2603v3/1*8g DDR4 2133 Memory/b140i SATA Model/h240 array card/3*1TB SAS HDD 1*550w non-redundant power/dual gigabit NIC/easy Install Rails
Check server enabled b140i SATA Controller, because b140i does not support SAS hard drives, the hard backplane link cable is connected to the H240 array card.
install using HP Smart configuration execution will windows Server R2 install to HP H240 FIO smart HBA (Start Controller) Logical volume.
Solution Solutions
On the power-on self-test(POST)Period byF9Key and select BIOS / Platform Configuration - system Options - SATAController Options - EmbeddedSATAconfiguration, usingHPbased onROMthe Setup Utility(RBSU)DisabledHPembedded Dynamic Smart Array controller port.
In this case, other models of machine estimation will also occur: such as HP Server DL60,DL80,DL180,DL20, and so on, want to encounter this issue of users attention.
This article is from the "server, storage" blog, be sure to keep this source http://njkware.blog.51cto.com/8085378/1840089
The HP ProLiant DL160 Gen9 Server is always stopped in the Windows window startup interface when the operating system is installed.