The iphone driver is not recognized by Eclipse under Ubuntu (in the case of Xiaomi 2S)

Google's official Development wizard has set the Android phone to allow the installation of non-market programs, and in the USB debugging mode, but still can not be recognized after USB connection to the computer, the problem is explained.

In the Ubuntu Linux environment, you need to add a rules file that contains the USB configuration information for each device you want to debug. Take the HTC phone as an example to achieve the following steps:

1. 在终端输入 sudo gedit /etc/udev/rules.d/51-android.rules
2. In the open file, addSUBSYSTEM=="usb", ATTR{idVendor}=="0bb4", MODE="0666"
3. Save after exiting in terminal executionsudo chmod a+r /etc/udev/rules.d/51-android.rules

Once the phone is connected to your computer, the HTC phone will be recognized as normal.

If it is another manufacturer's phone, you need to change ATTR{idVendor} the value in step 2. If you want to add more than one manufacturer's phone, repeat step 2. The IDs of other USB vendors are as follows:

Company

	USB Vendor ID
Acer	0502
ASUS	0B05
Dell	413C
Foxconn	0489
Garmin-asus	091E
Google	18D1
Htc	0BB4
Huawei	12D1
K-touch	24E3
KT Tech	2116
Kyocera	0482
Lenevo	17EF
Lg	1004
Motorola	22B8
Nec	0409
Nook	2080
Nvidia	0955
Otgv	2257
Pantech	10A9
Pegatron	1D4D
Philips	0471
Pmc-sierra	04DA
Qualcomm	05C6//小米
SK Telesys	1F53
Samsung	04E8
Sharp	04DD
Sony Ericsson	0FCE
Toshiba	0930
ZTE	19D2

Note: If the steps are still not recognized, check if the  ATTR{idVendor} letters in the values are lowercase (or as recognized by the computer!). ）。 Note If the device list is not on top, you can use the LSUSB command (Plug and unplug your phone to see how the device changes)

Method Two:

The contents of the/etc/udev/rules.d/51-android.rules file are modified to:

subsystem== "USB", env{devtype}== "Usb_device", mode= "0666", group= "Plugdev"

The iphone driver is not recognized by Eclipse under Ubuntu (in the case of Xiaomi 2S)