The motherboard does not recognize the optical drive what to do

the motherboard does not recognize the solution for the optical drive:

1. Plug the optical drive data line again or switch to a data line, change the location of the optical drive jumper, restart;

2.BIOS Verify that the IDE channel of the optical drive is not set to Disabled or closed;

3. Right click on "My Computer", select "Properties", in the pop-up window into the Device Manager page, and then click "Refresh" to see if the CD-ROM drive can be found;

4. In Device Manager, double-click the IDE ATA/ATAP controller under it, primary IDE channel and secondary IDE channel--Advanced settings--Set the device type in device 0 and device 1 to automatic detection-OK. ""

5. Locate the T and S files in the C: Packing directory (if not, create them), and then enter the following in the T file: c:windowscommandmscdex/d:mscd001; Enter in the S file: device=c:windowscommandebd S. Then restart the computer to see if you can find the optical drive;

6. Replace the motherboard driver to see if the CD-ROM drive can be found;

7. If none of the above methods are possible, the optical drive may be damaged.

The computer does not recognize the optical drive solution:

One, cause the system cannot detect the optical drive the reason

1, the system has disabled the automatic detection function

The computer is unable to detect the optical drive, possibly the automatic detection feature is disabled in System Device Manager. Although it is automatically detected by default, some optimization tools directly set the IDE to not automatically detect, so there is a problem that the optical drive cannot be found.

2, the BIOS disables the optical drive

There are some settings in the motherboard BIOS, mainly used to detect the IDE interface on the motherboard interface, if the function of automatic detection of IDE interface is turned off, the failure of the optical drive cannot be detected by the computer.

3, the optical drive power cord/or data cable is not plugged in well

In addition, it may be that the optical drive data cable or the optical drive power cord in the host box is not plugged in or loose, causing the computer to not detect the optical drive.

Second, the solution system does not detect the optical drive method

1. Device Manager to disable the automatic detection function solution

Step 1th: Click Run in the Start menu, type "Devmgmt.msc" in the pop-up run window, and make sure to open Device Manager.

Step 2nd: Open the IDE ATA/ATAPI controller under Device Manager and double-click the secondary IDE channel.

3rd step: In the Advanced Settings tab of the IDE Channel Properties window, set the device type under device 0 to automatic detection, the device 1 also set, and determine.

Step 4th: Make sure to go back to Device Manager, then set all secondary IDE channels and the advanced settings of the primary IDE channel to automatic detection in turn, the transfer mode is DMA (if available), and then reboot the computer.

2. Motherboard BIOS Disable Optical drive resolution

1, directly to the motherboard BIOS restore factory settings.

2, can go into the BIOS into the IDE set to Automatic detection. The specific steps are as follows:

The 1th step: The computer restarts, in the boot when the following image shown in the interface, press the "Delete" key to enter the motherboard BIOS setup interface.

Step 2nd: Locate the "standard CMOS Features" in the motherboard BIOS interface and enter.

Step 3rd: Check to see if there is a CD or DVD similar to the following in the standard CMOS feature settings interface, as shown in the following illustration, that is, the motherboard BIOS does not detect the optical drive.

Step 4th: Use the arrow keys in the keyboard to move to none and enter, see if set to Auto? If you press the ESC key to return to the superior menu, if it is not set to auto, and then turn all the set to auto, and press F10, input y computer restart can be.

5th step: After the motherboard BIOS setup is completed and restarted into the system, see if the optical drive is detected by the system.