In the use of computer optical drive, the optical drive card will not come out is more common situation. This may be the problem with the contact between the internal parts of the optical drive.
You can uninstall the optical drive first and remove the upper and front cover of the optical drive. After removing the upper cover, you can see the movement of the optical drive, and there will be a belt on the left or right side of the tray with a tray motor. First of all to check the belt dry not clean, but also to check if there is dislocation, and then to the belt and motor end of a small amount of oil. In addition, the optical disk tray on both sides of a row of serrated, tray pop-up and retract all rely on these sawtooth, but also to the sawtooth oil, check there is no dislocation. Wipe off the excess oil, then reinstall the optical drive, and then start the test.