The optical drive does not eject the troubleshooting instance successfully

Optical drive is our common optical storage device, but the optical drive is also a computer system easily damaged equipment, a CD-ROM drive is 23 time will expire. The common failure of the optical drive besides the decline in the ability of the bald-headed aging, there are some unusual mechanical faults. I have recently encountered an example.

An optical drive, the ability to read the disc is good, has not been repaired. Recently press out the Cangjian, feel the CD-ROM slow reaction, tray eject slowly, also so into the warehouse. After a period of time, the fault aggravated, press the move out of the warehouse key, only to hear the optical drive has motor rotation sound, but the CD-ROM tray can not eject, many times press the move in and out of the warehouse key, the CD-ROM tray occasionally will have access to the warehouse action. There is an emergency eject hole in the optical drive panel, a paper clip or something like that can be used to top the tray, and then read the disc properly. This little problem is annoying and annoying. Although we are not studying electrical origin, but still want to play DIY spirit, find a way to fix it!

In the optical drive "sick" period, although not smooth in and out of the warehouse, but the normal reading disk, indicating that the bald part of the optical drive is not damaged, the fault should be in the mechanical part. Because the fault is in the inside of the optical drive, the optical drive must be disassembled for maintenance. The process of removing the optical drive is relatively simple, there is no need to say more. Open the optical drive, look intently, good boy, the CD-ROM of the interior gathered a large amount of dust, the owner is too careless, not to the optical drive a comfortable environment, it is no wonder that the optical drive will be "temper".

The optical drive in the dust removal, put into a CD-ROM test machine, the results of the failure is still, look like dust on the impact of light drive is not big. How to solve the failure of the optical drive out of position? Carefully observe the work of the CD-ROM tray, the CD-ROM tray has two notches, card in two plastic track, the tray has gears, the motor driven by the completion of the movement in and out of the warehouse. Looking intently, in the CD-ROM drive track, the dust, the original grease has dried up hardening, tray and optical drive track between the resistance is very large, will be the pallet and rail friction between the increase and lead to the tray can not be out of the warehouse? Sweep the dust off the optical drive track and clean up the hardened grease, and then in the track and the tray between some lubricants, or some can play the role of lubrication, such as car butter, hospital Vaseline, etc., after processing, the optical drive access to the computer, press the drive in and out of the warehouse key, CD-ROM tray should also launch and open, Ah, Trouble Shooting!

The impact of optical drive in and out of the warehouse many factors, such a failure may be just one of the circumstances, hoping to attract everyone's attention!