There is a doctor who never come to the laboratory, but her computer every day, only recently know that she was in the dormitory Remote control laboratory computer, really lost to this House. But this is a good idea for the otaku, but the laboratory computer can not be opened for 24 hours? Is there a remote and can be turned on software? The internet has found several remote control software for comparison, like TeamViewer, pcanywhere, Splashtop, Although remote operation is very simple, but can not boot. Finally the target lock the Sunflower remote control software.
Just My Computer motherboard is gigabyte ga-z77x-up71.0, Sunflower is controlled by the remote boot module by default open. Only need to be on the main control side of the direct boot on it.
What if it is not a gigabyte motherboard? is not the boot, in fact, you can buy their boot stick, the boot rod and remote boot card is a different one can open the LAN hundreds of host, put it in our laboratory router, all the laboratory computer can boot up, can't wait to experience a moment, The effect is still good, below to share with you this boot stick operation.
Boot Bar Installation
First plug one end of the boot bar into the power supply, and then the other end of it connected to the lab router, it was not long before the green light above it and the yellow light on the bottom of the light up, indicating that the power is successfully connected.
Boot Bar Configuration
The boot bar is then required to authorize the host. Use Passport and password to login to the Sunflower Management Center, into the boot bar of the background management, and then open the device List "remote management" of this, the boot bar to authorize.
Next in the authorized host, I select the host in the LAN to add, easily authorized to succeed!
More difficult is next to the IP address configuration. At the beginning, don't understand the place I also specially to the Sunflower official website to see the boot Bar function demo and help the Raiders, that's what it's all about. Also need to use Passport and password to login to the Sunflower PC version of the main control, and then according to the network environment to automatically obtain the IP address, or manually set the IP address.
Managed-end configuration
After this, the next step is to have a simple configuration of the controlled computer, first in the shutdown mode under the Bios,bios Power Management menu with remote Wake up or Wake on LAN option computer to support remote boot.
After the successful setting, the login sunflower is controlled to ensure that the remote boot module on the controlled end is turned on, otherwise the boot can not be realized.
Everything is ready, login to the Sunflower master, in the host list, click on the binding boot bar of the offline host, that is, the control of the laboratory computer, and then, witness the miracle of the moment to-the laboratory computer really smooth boot!
And the use of Intelligent Terminal Device control terminal can also be turned on, so on the road can also open the laboratory computer.
After successful start-up, the Remote Desktop control of the lab computer can be realized in the dormitory.
When the remote found sunflower also provides remote file function, no need to run on both sides can easily transfer files, sunflower boot stick and sunflower remote control software perfect combination, is simply lazy person's great welfare!