The WiFi password is correct, the phone is not even, everyone else is normal?

Small Series Summary: If you hit the WiFi password correct phone can not even, the other people are normal problems we first look at the small set their own sharing method, restart the phone if not, the current WiFi delete, and then reconnect the input password can generally be resolved.

Method 1:

Settings-General-wlan-turns off WLAN functionality, turns it off and then turns it back on and then reconnect to WiFi.

Using a mobile phone to connect to WiFi, after the initial connection is successful, the phone will retain a network IP address assigned by WiFi connection, it will be applied to the current WiFi, if there is no address conflict, it should be able to access the Internet, but if there is an IP conflict can be used to try to resolve.

Method Two:

Settings-General-wlan-Select the wifi-of the connection exception click the WiFi signal icon on the right-click Cancel Save-then re-enter the password and reconnect, so that the mobile phone can get a new address and connect normally.

Method Three:

If the connection to WiFi is not properly connected during the verification phase, you will need to check that the WiFi password entry is correct, that the WiFi password is changed, or that the router's security rules are set correctly.

When the WiFi password is changed and the phone is not connected, you need to manually update the WiFi password. WiFi Password input error, also need to manually re-enter the WiFi password. You can refer to the second recruit: Settings-General-wlan-Select the wifi-of the connection exception click the WiFi signal icon on the right-click Cancel Save-and then re-enter the password and reconnect, so that the mobile phone can get a new address and normal connection.

Re-enter the correct password and reconnect to the wireless network again

Method Four:

If the above three strokes, not successfully solve the problem, we can try to check the phone-side WLAN advanced settings.

Settings-General-wlan-Select WiFi for connection exceptions and long press-select Modify Network-Displays advanced selections to view and change proxy and IP settings based on router security rules.

In most cases, the proxy and port settings are not changed, but when there are common problems with WiFi, there is no mistake in choosing to view them.

Method Five:

On the basis of the fourth recruit, if the default settings do not connect properly, then we need to consider or see if there is a possible problem with DHCP address assignment on the connected router or the device has obtained the wrong IP address.

We can look for the following settings: Settings-General-wlan-Select Connect to the abnormal WiFi and long press-select Modify Network-show advanced options-ip settings to change the static, and then according to the routing settings, enter the relevant parameters

We need to be aware that setting a static IP address does not necessarily apply to all routers, and if you switch to a different WiFi environment, we may need to restore the default settings or make appropriate changes to the router settings in the current WiFi environment.

Best, if the above method is not good we check the router is not your Mac or IP address to limit the Internet, so you can not set up the Internet, only the lifting of restrictions on the Internet.