The method of interconnect of wireless wired router

The use of routers is already very common, if the home has a wireless router and cable router, how to connect it?

Description: Wireless router tp-link tl-wr841n Cable router tp-link (specific model not clear) the following settings are based on these two routers for example to set

Purpose: To receive wireless Internet access from a wired router

Description: Wireless connection cable Two kinds of schemes:

1. Wireless WAN port connection wired LAN port

2. Wireless LAN port connection wired LAN port

There are advantages and disadvantages to each of the two schemes:

First: You can save a LAN port

The second: can make two routers in the same network segment (in plain, can LAN game, such as CS), but can only use wired connection, cannot use wireless function. At this time the wireless router is only the equivalent of a switch.

You can decide which scheme to use according to your actual situation.

The first scheme wireless WAN port connection wired LAN port

Principle: Wireless WAN port and wired LAN port same network segment; Wireless LAN port and wired LAN port different network segment

Operation:

1. Disconnect the wireless and wired routers (if not, this is important)

2. Use wired or wireless connection wireless router Tp-link tl-wr841n

192.168.1.1 Landing

Network Parameters-"LAN Port Settings-" IP address set to:192.168.2.1-> save

WAN Port Address-"WAN Port Connection type: Set to" Dynamic IP "-" Save

System Tools-"Restart router"

3. Wireless WAN port connection wired LAN port

OK set complete, surf the internet to see it

Description

1) default setting for Tp-link

Login is 192.168.1.1, open DHCP,

So to change one of the LAN port IP, so as not to conflict

2 The wireless router's WAN port is set to dynamic IP, its WAN port is connected to the wired LAN port, (has the line

DHCP, which is turned on by the device, gets the IP address directly from the wired router.

3 after you want to log in to the wireless router to use 192.168.2.1.

The second scheme Wireless LAN port connection wired LAN port

Principle: Wireless LAN port and wired LAN port same network segment, different IP; wireless router shuts down DHCP

Operation:

1. Disconnect the wireless and wired routers (if not, this is important)

2. Use wired or wireless connection wireless router Tp-link tl-wr841n

192.168.1.1 Landing

Network Parameters-"LAN Port Settings-" IP address set to:192.168.1.2-> save

DHCP server-"Do not enable-" save

System Tools-"Restart router"

3. Wireless LAN port connection wired LAN port

Description

1) default setting for Tp-link

Login is 192.168.1.1, open DHCP,

So to change one of the LAN port IP, so as not to conflict

2 wireless Router At this time is only the equivalent of a switch, we want to obtain the IP address from the wired router, so the wireless router's DHCP to shut down. This allows the IP address to be obtained directly from the wired router.

3 after you want to log in to the wireless router to use 192.168.1.2 to