The method of nw715p router bridge in Lei Ke

has been introduced to you before the problem of wireless relay, below I give in the vast numbers of netizens introduce Lei branch Router bridge concrete steps.

　　First, preparatory work

(1) Two lei ke nw715p wireless router, hereinafter referred to as P1,P2.

(2) P1 the master route, and then the external network.

　　Second, Step one

(1) login into the P1 Management page, the default IP is 192.168.1.1, username and password for guest.

(2) Modify the wireless network mode to Ap+wds, set the SSID of the P1, change the channel to Manual, save.

1, then click on WDS settings, using AP detection, search P2 wireless signal and then connect, set a 8-bit password at random.

2, click Wireless Security Management, you must set up to enable wireless encryption.

　　Third, step

(1) Login P2 Management page, click Network Configuration-Intranet configuration, modify routing ip, and P1 in the same network segment.

(2) Also click on WDS settings, use AP detection, search P1 wireless signal and then connect, and set the same password as P1.

1, click on wireless Security management, set up with the same wireless encryption mode P1.

2, click Network Configuration-dhcp server, turn off DHCP assignment.

As long as you follow the above steps to do, two Lei routing bridge can be successfully set up, in the WDS settings list can see that two routes are connected to the state.