The network password must be 40-or 104-bit.

For wireless connection, the following dialog box is displayed: "The network password must be 40 or 104 bits ":

Solution:

I,If WEP encryption is set in the wireless router, the preceding dialog box is displayed because the password length you entered does not meet the requirements. Check your password.

.

The number of key characters required for each key type in the WEP encryption method in a wireless router:

64-bit key: Five ASCII characters and 10 hexadecimal characters

128-bit key: 13 ASCII characters, 26 hexadecimal characters

152-bit key: 16 ASCII characters, 32 hexadecimal characters

2. If WPA-PSK/WPA2-PSK encryption is set in the router, the most likely cause is that the system does not support this encryption method

Check whether the system supports this encryption method:"Wireless Network Properties", Select"Association", In the"Network Verification"To check whether your system supports

The encryption method set in the vro.

If no network verification method is set in the above red box, change the encryption method in the wireless router to the one supported by the wireless Nic.

Or download the OS patch to support the encryption of the front-end wireless router.

Operating System Patches support WPA-PSK/WPA2-PSK encryption:WindowsXP-KB893357-v2-x86-CHS.exe, click to download: http://www.bkjia.com/down/html/53538.html