The network setting of millet router and the method of password setting

　　How to set up the millet router

　　

First, if you have a wireless router, then put the power on, then plug in the network cable, into the line inserted in the WAN (usually the blue port), and then connect to the computer network cable to plug any LAN, do the work, then you will see the router behind the address and account number password, After the link in the browser to enter the address in the router to see, is generally 192.168.1.1 (of course, if your home is using the telephone line on the Internet, you have to prepare a modulation mediator, commonly known as "cat")

then enter the corresponding account and password, generally new bought are admin

After you do enter the interface, you will see a setup wizard on the left, and go in (the general is automatically bouncing out)

Go to the Setup Wizard interface

Click Next, enter the Internet mode setting, we can see three kinds of Internet choice, if your home is dial-up then use PPPoE. Dynamic IP general computer directly plugged into the network can be used, the upper layer has a DHCP server. Static IP is usually a special line or something, it may be the cell bandwidth, the upper layer does not have a DHCP server, or want to fixed IP. I chose PPPoE because I dialed.

Choose PPPoE dial-up Internet must fill in the Internet account and password, this should everyone understand, open broadband will have an account with, fill in the OK

Then the next step into the wireless settings, we can see the channel, Mode, security options, SSID and so on, the general SSID is a name, you can fill in, and then the pattern is mostly 11bgn. Wireless security option we have to choose WPA-PSK/WPA2-PSK, so safe, Lest you let others crack and rub the net.

The next step is to set the success.

Click to complete, the router will automatically restart, this time you wait patiently. The interface that appears after success.

　　Millet Router Password settings:

　　

Verify that the wireless network is connected and can be seen from the status bar

Open the browser, enter the router address: normal is 192.168.1.1. The address of your personal router shall prevail.

You can enter the router Setup page.

Go in before there will be login prompts, the normal default is the account for: admin, password is also admin

The settings in the wireless router are in wireless security settings under Wireless settings. Some routers will be in the security settings.

Go in. Wireless security settings, in addition to not set the password option, there are 3 ways to encrypt:

WPA-PSK/WPA2-PSK WPA/WPA2 WEP

The general user chooses this mode, this mode is relatively safe, can prevent the general steal the network software the attack.

Set your own router password, remind, we should pay attention to the case.