The requirement of networking and schematic diagram of D-LINK switch setting

D-LINK Switch configuration of the network requirements and schematic diagram of the display, for the D-LINK switch setting common command settings, we have discussed, D-LINK switch set networking requirements, the D-LINK switch settings schematic will appear in the text.

D-LINK switch set networking requirements:

Two Dlink switch DES-3324SR and DES-3328R, using the link aggregation function, using the two switches on the computer can communicate with each other. Link aggregation refers to the aggregation of two different vswitches into one group of ports. You can expand the bandwidth. And connect to multiple VLANs.

D-LINK switch settings schematic:

D-LINK switch settings command:

D-LINK switch settings on the DES-3324SR Switch:

DES-3324SR: 4 # config vlan default delete 1-24 (delete the default vlan corresponding port 1-24)

DES-3324SR: 4 # create vlan v10 tag 10 create vlan v10 ID for 10)

DES-3324SR: 4 # config vlan v10 add untagged 1-8, 23-24

DES-3324SR: 4 # create link_aggregation group_id 1 (create link aggregation group 1)

DES-3326SR: 4 # config link_aggregation group_id 1 master_port 23 ports 23-24 (route port 23-24 to trunk Group 1 .)

D-LINK switch settings on the DES-3328R Switch:

DES-3328R: admin # config vlan default delete 1-24 (delete the default vlan corresponding port 1-24)

DES-3328R: admin # create vlan v10 tag 10 create vlan v10 ID for 10)

DES-3328R: admin # config vlan v10 add untagged 1-8, 25-26

DES-3328R: admin # create link_aggregation group_id 1 (create link aggregation group 1)

DES-3328R: admin # config link_aggregation group_id 1 master_port 25 ports 25-26 (route port 23-24 to trunk Group 1 .)

The DES-3324SR switch settings are made by connecting the 23,24 of the DES-3328R to the aggregation port of the 25, 26 ports of the D-LINK using two express lines, and then the 1-8 ports of the DES-3324R can be interconnected with the 1-8 ports of the DES-3328R.