The setting method of wired router connecting wireless router with jhr-n835r example

With the rapid development of wireless network, wireless router is an indispensable part of our life. Many friends have a cable router at home, want to connect to a wireless router, so as to achieve WiFi access, it's convenient, fast, well received by friends like. I am using the jhr-n835r wireless router, then the following is a detailed description of " wired routers How to connect the wireless router " Operation method:

Tools/raw Materials

Wired Router (A)

Wireless Router (B)

Network cable Two Root

First type: A routed LAN Port B routed WAN Port

1

　　One, wired router setup

1, access to the cable router settings interface, LAN port parameters set;

2

2, WAN port settings, connection type PPPoE, fill in the Internet account, password;

3, DHCP settings, DHCP server Select Enable, automatic access to address pool start and end, with the gateway 192.168.1.1 the same paragraph.

3

　　Second, wireless router settings

① Hardware connection: Wired router WAN port broadband, LAN port wired computer, and then from the wired router LAN port to the wireless router WAN port as shown:

4

② Open the browser input 192.168.3.1 Enter the router settings interface (only the wireless router IP before you can enter the Setup interface), click on the WAN port to start setting;

③ change the online mode to "Get IP automatically", as shown in

5

④ change LAN IP to 192.168.x.1 (X refers to any number that is not occupied by the 0~254 interval)

6

⑤ Click Save, restart the router to complete the setup; (The main purpose of the WAN port here is to use the wireless router as a level two router)

Second type: A routed LAN port B routing LAN port

1

　　One, wired router setup

1, access to the cable router settings interface, LAN port parameters set;

2

2, WAN port settings, connection type PPPoE, fill in the Internet account, password;

3, DHCP settings, DHCP server Select Enable, automatic access to address pool start and end, with the gateway 192.168.1.1 the same paragraph.

3

　　Second, wireless router settings

① Hardware connection: Wired router WAN access broadband, LAN port wired computer, and then from the wired router LAN port to the wireless router LAN port as shown:

4

② Open the browser input 192.168.1.X (X refers to the 0~254 interval does not occupy any number, such as 192.168.1.2 into the router settings interface, because only the wireless router IP can be set prior to access), click on the LAN port to start setting;

③ shut down the DHCP server, as shown

5

④ Click Save, restart the router; (The main purpose of the LAN port is to use the wireless router as a wireless AP)

Wireless Router converts AP mode

1

　　Of course, there is a more efficient way to make our wireless router into AP mode , so set, no longer to set up other places, you can make the B router into wireless AP mode, you can imagine the wonderful wireless internet.

The operation is as follows, as shown in figure:

Attention matters

　　The subordinate LAN IP address can not conflict.

　　The wireless router needs to reboot after each setting is complete