The solution that the router 192.168.1.1 cannot open

Router 192.168.1.1 Solution:

1. First understand what 192.168.1.1 is?

IP 10.0.0.0-10.255.255.255 (Class A), 172.16.0.0-172.31.255.255 (Class B), 192.168.0.0-192.168.255.255 (class C) are reserved addresses in the intranet. Therefore, ip192.168.1.1 is an intranet reservation address, but also the default address of most brand router Settings page (some IP is 192.168.0.1, there are other addresses, but the basic is the router 192.168.*.* such address).

Click to view: What is IP, what is the intranet IANA reserved address.

Let's see what causes the Router management page to not

2. Check whether the input error causes the Open

Many netizens in the browser address bar in the wrong address, the result is not to go to the router, enter the following error address can not enter the router:

www.192.168.1.1

HTTP 192.168.1.1

192.168.1.0

192.168.11

http//192.168.1.1

http192.168.1.1

192.168.1.1

http:192.168.1.1

192.168.1..1

Www.192.168.1.1.com

192.168.1.1.1

http192.168.1.1

192.168.1.1.com

http.192.168.1.1

192.168.com

Www.192.168.com

HTTP 192.168.1.11

www192.168.1.1

http;//192.168.1.1 (should be colon: not semicolon;)

192.168. 1.1 (no spaces can appear in IP address)

192.168.1.1. (IP address can not be a bit of the last number.)

192. 168. 1. 1 (IP address should be used in English dot number ".", can not be used in Chinese period. or full-width point number ·)

http.//192.168.1.1 (http.//should be written as http://, with a colon: not a dot.

The correct access method is input: http://192.168.1.1 or http://192.168.0.1 (HTTP can be omitted, that is, directly enter 192.168.1.1 or input 192.168.0.1). If the confirmation address is not wrong, but still met 192.168.1.1 can't open how to do?

Check to see if ping 192.168.1.1 is normal

When not in 192.168.1.1, the performance of IE input 192.168.1.1 can not display the Web page, there may be a problem with network connectivity, we can use ping check: Click the Windows "Start" button, select "Program > Accessories > Command Prompt", In the Open Command Prompt window, enter "Ping 192.168.1.1" (Note that there is a space behind the ping, written directly ping192.168.1.1 will not get the correct result), if the results show similar to the following figure, indicating that the ping is not pass, Instructions cannot be accessed from your computer to the router.

3. Usually the following situations cause the ping to fail:

The router does not have power. For example, the power adapter is not plugged in, the router switch is not turned on, and so on. The router's LEDs will light up after PowerUp.

Computer and router between the network cable connection problems, such as Crystal Head loss, network cable rupture, network card loss will cause no connection, of course, can not land. Change the root network cable or access the router in another computer, if you can open a description of the network cable or network card problems.

The firewall prohibits access to the router IP192.168.1.1. According to the different firewall software setting method, lifting the prohibition can.

The network settings are incorrect. For example, the computer's IP address, subnet mask, gateway, and other settings error can not connect the router. For specific settings, refer to the router specification or view the following setup methods.

4. If ping is not a problem, but the login 192.168.1.1 not even how to do it? This is to see if the username and password you entered are correct. No matter the user name or password any one error, you will encounter 192.168.1.1 problems.

After you modify the router account or password, what if you forget it?

General routers have reset capabilities. Taking Tp-link as an example, on the back of the router (there are many network cable interface side), there is a "Reset" of the small hole, in the case of electricity, with fine wire (or toothpicks, such as hard fine sticks can) reach in and hold, and unplug the router power. Then again power, the network network cable connected to the router WLAN port, the computer connected to the router's LAN port, you can reset the router (different router reset method, please refer to the description). After resetting, and then connecting to 192.168.1.1, enter the initial username and password, unable to open the 192.168.1.1 fault is generally lifted.

Default 192.168.1.1 account password

Common 192.168.1.1 password defaults and 192.168.1.1 username default values are: 192.168.1.1 Admin admin

5. Router 192.168.1.1 Setup Detailed

The default IP of different brand routers may be different, but the setting method is basically the same. Here we use the Telecom 2M ADSL Internet, tp-link router (default IP 192.168.1.1 setting method), for example, introduce the router Internet settings. First click on the Start button, open the Start menu, select Control Panel > Network and Internet connection > network connection, and in the Open Network Connections window, right-click Local link to open local link properties, and then double-click Internet Protocol (TCP/IP)

6. Open the Internet Protocol (TCP/IP) Properties window, click Select "Use the following IP address" in the Panel, enter IP address: 192.168.1.2 (the last one can take any value between 2-253), Subnet mask: 255.255.255.0, default gateway: 192.168.1.254. Also select "Use the following DNS server address" to complete the first DNS server and alternate DNS server addresses, respectively. Note that the DNS server address please fill in the DNS address provided by your network provider. Telecommunications, Netcom (Unicom), railcom, the Great Wall Broadband, education network, such as different access to the network, DNS is not the same.