The solution to the computer's suspended animation when dialing the Internet

dial-up access to the Internet, sometimes encountered the computer suspended animation, is just installed broadband when the computer turned on a dial-up connection when the computer crashed, in fact, the computer did not crash, is suspended animation, to be a few minutes after the computer automatically good. No big problem, just for computer beginners, there is inevitably some panic. The following is to introduce the dial-up Internet when the computer suspended animation solution.

The reason for this dial-up computer to suspend animation is that Windows XP under the default installation mode, the TCP/IP settings for the network card "automatically get" status. When the system starts, the system first detects whether there is a fixed IP address in the NIC configuration, and if no fixed IP address is found, the outgoing packet requests the DHCP server in the network to assign the IP address; If you are not connected to a DHCP server, the system will use Automatic Private IP addressing. Specifies that the IP address of the NIC is either 169.254.0.1 to 169.254.255.254, and the subnet mask is set to 255.255.0.0.

Now commonly used ADSL modem in the default state, its DHCP function is disabled, so will not provide IP address to the system, in the Windows XP suspended animation, we will see the ADSL modem data upload and download lights flashing, and in the data lights stop flashing, the system will return to normal. At this point, run "ipconfig" to see the IP address of the network card is 169.254.x.x.

Method 1: Open ADSL broadband cat's DHCP function

Most ADSL modem have built-in DHCP function, this function is disabled by default, we can open DHCP through ADSL setup program, when the Windows XP system emits IP address assignment request, fast can provide available IP address, Windows XP system will not appear suspended animation phenomenon.

The following East letter e700a as an example to explain how to open adsl DHCP function. The e700a IP address defaults to 192.168.1.1. First, the IP address of the NIC is set to 192.168.1.2 In the network properties. Open IE, enter HTTP://192.168.1.1/in the Address bar, username and password are root, go to "DHCP mode" in "LAN", select "DHCP Server" in the Pull-down menu, and click "Submit" button below. Then save the settings and reboot as we

Method 2: Assign a fixed IP address to the network adapter

In Control Panel, open the Network Connections window, locate the "Local Area Connection" that is connected to the ADSL and enter the Properties window for the connection, and double-click Internet Protocol (TCP/IP) in the general item. The IP address of the network card is set to 192.168.0.1, the subnet mask is set to 255.255.255.0, the gateway and DNS are the default settings, then the "OK" button is clicked.

Method 3: Open Internet Connection Sharing for Windows XP

Although ADSL is connected to only one computer, setting up Internet Connection Sharing seems superfluous, but if Internet Connection Sharing is turned on, the Windows XP system becomes a miniature DHCP server, It will force the IP address of the network card to set to 192.168.0.1, this method and Method 1 have the same.

The above method, the second method is the most effective solution, but also the simplest, the average person as long as the master of this method can basically solve this situation. If you know the routing settings, these ADSL installation debugging as well as the computer maintenance personnel need three kinds of methods to master.