There is many kinds of film faced plywood such as brown film faced plywood, black film faced plywood, anti slip film face D plywood, green color plastic film faced plywood, red color polyster film, faced plywood and so on. The users can also require to print the own logos or the other name on the films. The common logos is Marineplex, Korinplex, Dyneaplex etc. The typical features of the film faced plywood are as belows:1. The PP plastic films is without toxic, anti fire with the melting point 165 degree, which is with strong Resistan Ce to water, abrasion, acid and chemical.
2. All the sheets is bonded by the high density phenolic resin-the best phenolic WBP glue that can resist 72h water Boiling and no delamination. The bonding is in compliance with En314-2 ClASS 3 exterior.
3. All the finished core plywood is via the times high pressure and temperature, and both sides is sanded well. The core of the film faced plywood is made up by the A grade Eucalyptus wood veneers, all the sheets is made up from the Top grade veneers which is with no holes, gaps, inclusion etc.
4. The cycling use time was more than.
5. Based on the above performance, the film faced plywood is easy to being installed, cut, sawed, drilled and can be wit H stood high concrete pressure (70KN). And they can be dismantled easily and the time are only 1/7 of the other steel mould. The concrete finish is smooth and neat after dismantling, Also they can keep surface warm and can be comfortably used for Construction in winter.
6. All the edges is sealed with PP plastic.as well, the H20 timber beam and the pulled pine LVL can also used in the concrete formwork holding systems well like th E film faced plywood.
This article is from the "10120188" blog, please be sure to keep this source http://10130188.blog.51cto.com/10120188/1632286
The typical features of the film faced plywood
