The use of Serial communication tool minicom under Linux

First, view the serial device for example, after inserting the USB to serial cable into the switch console port, execute the command:
$ll/dev/ttyusb*

Second, connecting the serial device $sudo minicom-d/dev/ttyusb0

Third, set the serial port parameters in minicom Press Ctrl+a,o, configure serial port rate 9600, 8 bits, no parity check, save

Iv. viewing minicom profiles [email protected]:~$ cat. Minirc
# machine-generated file-use Setup menu in minicom to change parameters.
PU baudrate 9600
PU Bits 8
Pu parity N
PU StopBits 1

The use of Serial communication tool minicom under Linux