Method 1
The most important thing isRoutingNow I want to explain how to set the network adapter TCP/IP protocol for the ADSL Wireless Router.
Right-click "Network neighbors" on the desktop, and select "properties" in the pop-up menu. In the displayed network dialog box, under the "configuration" tab, select "TCP/IP ......" (The ellipsis varies depending on your computer's network adapter.) then, click "properties" to bring up the "TCP/IP properties" window, in the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the NIC, for example, 192.168.1.14, and subnet mask 255.255.0 (the IP address in this example is used to be consistent with the factory address of ADSL. You can set the adsl ip address on the configuration screen as needed)
ADSL Wireless Router configuration 2
Select the "Gateway" tab, enter the IP address 192.168.1.1 of the Gateway (which is the default address of ADSL), click "add", select the "DNS configuration" tab, and select the "Enable DNS" option. In the "DNS server search" sequence bar, enter the IP address of the DNS server, and click "add" to add it to the above settings for WIN9X system. Let's look at the WINNT system! Step 2: The "TCP/IP properties" window is displayed. In the "TCP/IP properties" window, select the "specified IP Address" option on the "IP address" tab. Enter the IP address of the NIC, for example, 192.168.1.14, subnet mask 255.255.0, and Gateway: 192.168.1.1. This is the default value of Modem.) enter the IP address of the DNS server. The following is a summary!
Click OK to return to the network dialog box. Click the confirm button in the networks dialog box to exit 9X system to restart the machine, NT system is not needed, suitable for the setup method of the DB102DB102-ADB102-BDB108. After you have just set up the NIC, open the browser and type in the address bar. Enter the User Name admin and password dare. This is the default value. If you cannot enter this value, contact your local dealer and telecom)
Method 3
I. ADSL Wireless Router settings: WAN settings
Disable 1-7 "virtual power". Here, we use 1-virtual power off as an example. The method is to select 1 in "virtual power" in "WAN" Settings and press "Submit ", select "enable", select "NO", and then press "Submit" to complete the process. This is also done for others.
Set "enable" of "0" to "Yes"
Set the VPI and VCI values. Could you tell me the local telecom)
For dynamic routing, select "PPPoELLC" in "Encapsulation Format". For Static Routing, select "1483BridgedIPLLC" in "Encapsulation Format"
Select "Disabled" in the "bridge" option"
For dynamic routing, enter "User Name" and "password" in the PPP "User Name" and "password" columns (the specific value is specified by the DSL service provider) for Static Routing, enter "static IP Address", "subnet mask", and "Default Gateway" (the specific value is specified by the DSL service provider)
Enter 192.168.1.1 and click "Submit" in the lower part of the page to save the setting value.
Ii. ADSL Wireless Router configuration: LAN Configuration
The parameters on this page can be left unspecified. Keep the default configuration.
Iii. ADSL Wireless Router configuration: NAT configuration
Set "NAT" to "NAPT ". Click Submit to save the settings.
Iv. ADSL Wireless Router configuration: Save the Configuration
Click "Save settings" in the user configuration bar to go to the "Save ADSL Wireless Router Settings" page. Click "Submit" to save all the settings. ADSL will automatically restart and run according to the set parameters. Note: VPI and VCI must be correct!