Three Popular Alpha router port ing problems

I have read many questions about port ing of the Alpha router in the Q & A column on the Internet. I have sorted out the following three questions, so I have figured out these questions, the problem will be solved in the future.

Alpha router port ing

Take the web server as an example: the gateway ip address on the router is 192.168.18.1, and the Intranet ip address of the web server is 192.168.18.3;
◆ First, use IE to log on to the web management interface of the router;
◆ Click <NAT Settings> on the left and click <Virtual Server> in the expanded drop-down menu;
◆ Enable>-<80 for common ports>-<192.168.18.3 for IP addresses>-<TCP protocol>;
◆ Click <add> and click <save> at the bottom of the page.

Open your browser, enter http: // 192.168.18.1 in the address bar, and press Enter. The computer will ask you to enter the user name and password. If this is your first use, you can enter the pre-set Username: admin Password: admin to enter the page, click the virtual server, and then we can make a port image. one is the TCP port of EMULE (4662 by default), and the other is the UDP port of EMULE (4672 by default ). of course, you may not use the default port number of EMULE, but the settings in EMule must be consistent with the two port images we set below. First, we will map the TCP ports.

◆ Enter a number in the Application name column to map this Alpha router port to a number, for example, 62. Or any text that is convenient for your memory.
◆ Set the internal port range field to the TCP port used by EMULE (4662 by default). The numbers in the two boxes must be the same.
◆ Select "TCP" as the port type"
◆ Fill in the Intranet IP address of your machine, for example, 192.168.1 .*

Then we will map the UDP port.
◆Same as above
◆ Set the internal port range field to the UDP port used by EMULE (4672 by default). The numbers in the two boxes must be the same.
◆ Select "UDP" as the port type"
◆ Fill in the Intranet IP address of your machine.
After setting the port image, click "OK" in the Enable box (both of them need to be checked). After the route is restarted, the setting of the port image is complete. restart the scorpion and you can see it becomes a high ID!

How do I set the Alpha router port ing?

The alafat router is not a general type of router that uses 192.168.1.1 as the IP address, such as 10.0.0.138. There is really little introduction to this router on the internet ...... First, enter 10.0.0.138 in the browser window to enter the routing settings window. Then, choose "Advanced Configuration"> "NAPT"> "add", and then select "Communication Protocol"> "TCP/IP"> "Nic IP, if you do not know, use the internal and external ports 10.0.0.1 to increase the number of external ports by 16881 ~ . At last, click "application" And remember to click "Save all settings" in the upper left corner to complete the success. Please shut down and the adsl modem will be powered off. Restart.

Alpha-G3 SOH0 router how to do alpha router port ing?

I'm a AFR-G3 SOH0 Firewall Router, my network is 2 m ADSL, before using a machine directly inserted into the ADSL MODEM BT speed down to full speed, later, I added another machine to connect to the Internet and bought the route. The speed of the route through the BT is slow. I saw that the NAT setting is my IP address 192.168.18.2. I don't know where the port is? Port ing cannot make your download faster! He only maps a machine through the Alpha router port and connects him to the Internet. For example, port 80 is a webpage by default, port 8000 is used by the pigeon program, and port ing is enabled, it cannot make your download speed faster!