Three-tier network VLAN static routing, reverse routing settings précis-writers
Hub Switch Settings
Set VLAN 1 ~ n ...., Router layer VLAN 9
IP segment/Subnet mask/Gateway (interface)
----------------------------------------------------------------
192.168.1.0/255.255.255.0/192.168.1.1
192.168.2.0/255.255.255.0/192.168.2.1
192.168.3.0/255.255.255.0/192.168.3.1
Router Layer VLAN 9
192.168.9.0/255.255.255.0/192.168.9.1
Hub Switch Global routing (point to Router)
0.0.0.0/0.0.0.0/192.168.9.254
Router LAN settings
Router LAN settings (note subnet mask matching), connecting to the hub switch VLAN 9 port
192.168.9.254/255.255.255.0
Router Reverse Routing table
For routers on a three-tier network VLAN, add a reverse (static) routing table to the router, depending on the hub switch settings.
IP segment/Subnet mask/Gateway
192.168.1.0/255.255.255.0/192.168.9.1
192.168.2.0/255.255.255.0/192.168.9.1
192.168.3.0/255.255.255.0/192.168.9.1
Router WAN port settings (here based on carrier provisioning information)
Slightly
blog.csdn.net/joyous/article/details/50762126
Q Group Discussion 236201801
.