Application of wireless Network Camera
Tp-link Infrared Wireless Network Camera specifically for family housing and other space more compact scene design, network structure is simple and practical, 1 routers + 1 Cameras is a complete set of security systems, network cost low. After using the mobile phone app to configure the camera, you can implement local or remote monitoring.
Download
Tp-link
Security
APP
Use the mobile phone sweep tool to scan the following two-dimensional code and follow the prompts to download and install the app.
Sweep code Download
Tp-link
Security
APP
|
Scan two dimensional code
Download Tp-link Security App
|
|
This article describes the Android system mobile phone app configuration wireless Network Camera method.
IOS
System Phone
APP
Configuration
the method of wireless network Camera
Mobile Phone
APP
Add a wireless network Camera
Use the power adapter to power the wireless network Camera when the system light is red and long lit. Wait for the camera led to turn red and green alternately flashing, while confirming the wireless name and password of the router to facilitate subsequent operation.
Note : If you need to implement remote monitoring, make sure that your router has successfully connected to the network.
2.
login
tp-link
security
APP
Open the Phone app and enter the registered Tp-link ID account and password. If there is no Tp-link ID, please click "Create Account", sign up and login again.
Log in
Tp-link ID
|
Attention:
You can also use local mode to log in and implement monitoring on the same LAN.
|
|
3.
Mobile
APP
add wireless Network Camera
After entering the app, click "+" in the preview screen to add the channel and click "+" again to add the device:
Android app can automatically search the surrounding camera signals, wait for the interface to refresh the list, find the wireless camera Wi-Fi signal (you can check the camera shell sticker on the MAC address to confirm), click "Add":
Add a wireless Network Camera
|
Camera wi-fi:tp-link_ipc_xxxx
(XXXX is the MAC address last four digits)
|
|
Note : If there is no Wi-Fi signal for the camera in the list, please press the camera reset button for about 3 seconds and wait for the camera to complete reboot before attempting to add the device.
4.
mobile phone connection to the camera's
Wi-Fi
signal
When you add a camcorder, click "Connect Wi-Fi" on the screen, and the app will automatically connect the phone to your camcorder's Wi-Fi signal:
Mobile Connection Camera
Wi-Fi
|
|
|
5.
connect the camera to the router's Wi-
fi
signal
When the phone is connected to the camera's Wi-Fi, the interface prompts to connect the camera to the router's Wi-Fi. Select the wireless signal for the router (take Zhangsan as an example) and enter the wireless password and click "OK":
Camera Connection Router
Wi-Fi
|
|
|
6.
add camera, complete configuration
Interface prompts the camera is connecting Wi-Fi, wait for about 10 seconds, the interface prompts the camera to successfully connect Wi-Fi. Click "Add" to wait for the app to add the camera:
After the addition of success, app automatically returns to the Selection channel interface, click on the added camera, you can in the preview interface Real-time watch the monitor screen:
Mobile Phone
APP
Preview monitor Screen
|
|
|
At this point, wireless Network Camera configuration completed, Tp-link Security app can be achieved anytime, anywhere preview monitoring screen.
Wireless Network Camera FAQ
Q1
: Can you set up a wireless network Camera with your computer?
Factory state, wireless network cameras can only be set through the mobile phone app. Wireless network cameras must be connected to the router Wi-Fi before they can be managed via the computer web.
Q2
: Does the wireless network Camera support wired?
Not supported. Wireless network cameras do not have an Ethernet port and can only be connected wirelessly.
Q3
: Wireless network cameras can and which brands of
NVR
work together?
Wireless network cameras can be used in conjunction with NVR that support onvif protocols.
Q4
: How to reset the wireless network Camera?
Press and hold the reset key for about 3 seconds, indicating that the factory settings are being restored when the LED changes to a red flash. Reconfiguration is required after the factory is restored.
Q5
: Why
APP
failed to add wireless network Camera?
If the mobile phone app uses Tp-link ID to log in, the camera will not be connected to the Internet router Wi-Fi, the camera can not bind the Tp-link ID, resulting in failure to add. You can add a camcorder again after you log in to the app using local mode.