[TL-IPC20/TL-IPC22] mobile app set up a method for wireless IPC-ios version

Application of wireless Network Camera

Tp-link Infrared Wireless Network Camera specifically for family housing and other space more compact scene design, network structure is simple and practical, 1 routers + 1 Cameras is a complete set of security systems, network cost low. After using the mobile phone app to configure the camera, you can implement local or remote monitoring.

Download Tp-link Security APP

Use the mobile phone sweep tool to scan the following two-dimensional code and follow the prompts to download and install the app.

Sweep code Download Tp-link Security APP
Scan two dimensional code Download Tp-link Security App

This article describes the iOS system mobile phone app configuration wireless Network Camera method.

Mobile Phone APP Add a wireless network Camera

1. power the camera on

Use the power adapter to power the wireless network Camera when the system light is red and long lit. At the same time confirm the router's wireless name and password, convenient for subsequent operation.

Note : If you need to implement remote monitoring, make sure that your router has successfully connected to the network.

2. login tp-link security APP

Open the Phone app and enter the registered Tp-link ID account and password. If there is no Tp-link ID, please click "Create Account", sign up and login again.

Log in Tp-link ID
Attention: You can also use local mode to log in and implement monitoring on the same LAN.

3. Mobile APP add wireless Network Camera

After entering the app, click "+" in the preview screen to add the channel and click "+" again to add the device:

Add Device

Click "Other" in the Add Device interface and select "Wireless Network Camera":

Add a wireless Network Camera

Next, follow the interface prompts to operate, click "Next", select the profile of the wireless Network Camera:

Select Wireless Network Camera

4. mobile phone connection to the camera's Wi-Fi signal

The camera's led turns red and green alternately flashing, indicating that Wi-Fi is waiting to be configured. Click "Yes":

Camera indicator red and green flashing alternately

Follow the prompts to check the MAC address on the camera's shell sticker to confirm the camera's Wi-Fi signal. Turn on the phone "set >wi-fi" to connect to the camera's Wi-Fi signal:

Mobile connection Camera Wi-Fi
Camera wi-fi:tp-link_ipc_xxxx (XXXX is the MAC address last four digits)

5. connect the camera to the router's Wi- fi signal

Mobile phone connected to the camera's Wi-Fi, back to Tp-link Security app interface, click "Next". Select the wireless signal for the router (take Zhangsan as an example) and enter the wireless password and click "OK":

Select the router's Wi-Fi signal

The camera is blinking green, indicating that Wi-Fi is being connected. After about 10 seconds, the LED turns green and long, indicating a successful connection and clicking "Yes" in the app interface:

Camera connected router Wi-Fi

6. Mobile phone connection to the router's Wi-Fi signal

Turn on the phone "set >wi-fi" to connect the phone to the router's wireless signal (Zhangsan):

Mobile Connection Router Wi-Fi

7. add camera, complete configuration

Back to Tp-link Security app, click "Next". Wait 10 seconds or so, the interface prompts the camera Wi-Fi configuration success, click "Add", waiting for the interface to add a successful camera.

Add camera

After the addition of success, automatically return to the Selection channel interface, choose to add a good camera, click "OK", you can in the preview interface Real-time watch monitor screen:

Mobile App preview monitor screen

At this point, wireless Network Camera configuration completed, Tp-link Security app can be achieved anytime, anywhere preview monitoring screen.

Wireless Network Camera FAQ

Q1 : Can you set up a wireless network Camera with your computer?

Factory state, wireless network cameras can only be set through the mobile phone app. Wireless network cameras must be connected to the router Wi-Fi before they can be managed via the computer web.

Q2 : Does the wireless network Camera support wired?

Not supported. Wireless network cameras do not have an Ethernet port and can only be connected wirelessly.

Q3 : Wireless network cameras can and which brands of NVR work together?

Wireless network cameras can be used in conjunction with NVR that support onvif protocols.

Q4 : How to reset the wireless network Camera?

Press and hold the reset key for about 5 seconds, indicating that the factory settings are being restored when the LED changes to a red flash. Reconfiguration is required after the factory is restored.

Q5 : Why APP failed to add wireless network Camera?

If the mobile phone app uses Tp-link ID to log in, the camera will not be connected to the Internet router Wi-Fi, the camera can not bind the Tp-link ID, resulting in failure to add. You can add a camcorder again after you log in to the app using local mode.