To improve the clarity of C168 barcode machine!

Most users are low prices of commercial bar code printers, and the use of the quality of the Ribbon is also generally, if not set, by default the printed content effect is very poor, so the use of low-end machines want to get better printing effect usually need to set up! Below Shenzhen Trust constant science and technology to teach you how to set up barcode printer to get the best printing effect!

Method One: Bar code printer If the printing is not clear, fuzzy and other effects are not good, we can generally modify the printer properties to achieve the best results. First of all, we can adjust the printing speed, we can reduce the speed of the printer, so that the printing speed is slow, the effect of printing will naturally become better.

Method Two: We can adjust the printing depth of the barcode machine, the greater the depth value, the higher the printing depth, the better the clarity, in peacetime use of bar code printer, as far as possible not to the printing depth of too high, easy to cause the bar code print head temperature high, damage speed, as long as can be printed clearly in the case, The lower the depth value the better, this can extend the barcode label printer's service life.

Method Three: Set the relevant font for the printed content to obtain the best printing effect, such as the Chinese font selection in bold, if you can specify a font can be bold.

Method Four: Print content as far as possible using a professional barcode printing software, such as bartender, so that the printed content is relatively better than a lot!

In general, the setting method is divided into the printing content setting, the printer related parameter setting two parts, the setting steps are as follows:

　　First, print content settings

　　1. Barcode setting

Barcode Printing If it is a linear one-dimensional code, the general use of 128 yards, you will get the best printing effect! Set as follows:

　　2, Chinese font settings

Chinese fonts can generally choose bold or font bold, so that the printing effect will be much better

　　3, English font settings

English font can choose the Times New roman,arial font, and then bold, refer to the following figure:

Set the effect diagram as follows:

　　Second, the printer parameter setting

This setting is set up when you print it as follows:

　　1. Print Temperature setting

Generally speaking, low-end machine set the temperature needs to be higher, the following figure, you can put the default temperature to the right, so set the temperature will be higher, the specific value of the actual printing situation shall prevail:

2. Printing Speed setting

Adjust the speed of the current printer will also get a better printing effect, in most cases, the speed is lower, the printing effect will be better!

　　Note: the above situation is in the printer and ribbon has been determined to set the situation down, users can also choose a better import of carbon bands, so fine toner can also get better results! If you have not solved your problem, you can visit Shenzhen Trust Technology official website to get more technical information!