To set the Tp-link dual-frequency Concurrent Router WDS method steps

As shown in the following illustration, the general topology of WDS for tl-wdr4310 and tl-wdr4310, with the central idea of enabling WDS on the 5GHz band to connect two tl-wdr4310 wireless bridges, Simultaneously uses the 2.4GHz and the 5GHz frequency band to carry on the wireless coverage, uses for the wireless client's access. The following describes how to implement wireless WDS using two tl-wdr4310 and wireless roaming in 2.4GHz and 5GHz.

Key to wireless roaming settings: tl-wdr4310 A, B at 2.4GHz or 5GHz under the same SSID, wireless encryption method and key are the same, and set the wireless channel without interference (2.4GHZ band channel number subtracted at least 5,5ghz due to the ability to open WDS, Channel must be the same).

Action steps are as follows:

Here's how to set up this topology.

, tl-wdr4310 a sets the 2.4GHz and 5GHz frequency band basic information and the wireless security.

1. Open tl-wdr4310 a Settings page (default 192.168.1.1), open the menu "Wireless band settings", select "Wireless at the same time work in the 2.4GHz and 5GHz band", click "Save".

2. Open the Menu "Wireless Settings 2.4GHz"-"Basic Settings", set tl-wdr4310 a wireless SSID, this example is "Tp-link_2.4ghz", Channel set to "1", click "Save", as shown in the following figure.

3. Open the Menu "Wireless Settings 2.4GHz"-"Wireless security Settings", set wireless security, the proposed choice of WPA-PSK/WPA2-PSK encryption, encryption algorithm select "AES" and enter "PSK password", click "Save", as shown in the following figure.

4. Open the Menu "Wireless Settings 5GHz"-"Basic Settings", set the SSID, this example is "Tp-link_5ghz", and specify "Wireless channel" (This example select 157), click "Save", as shown in the following figure.

5. Turn on "Wireless Settings 5GHz"-"Wireless security Settings", set wireless security, it is recommended to choose WPA-PSK/WPA2-PSK Encryption, encryption algorithm select "AES" and enter the PSK password, click "Save" and restart the router to make the configuration effective, as shown in the following figure.

tl-wdr4310 b Sets the basic information and wireless security for the 2.4GHz and 5GHz frequencies and opens the WDS Bridge front-end a router at 5GHz frequency.

1. Open tl-wdr4310 B's Settings page (default 192.168.1.1), open the menu "Wireless band settings", select "Wireless at the same time work in the 2.4GHz and 5GHz band", click "Save".

2. Open the Menu "Wireless Settings 2.4GHz"-"Basic Settings", set tl-wdr4310 B wireless SSID, set up with the tl-wdr4310 a 2.4GHz band the same SSID "Tp-link_2.4ghz", in order to avoid with a router to generate wireless interference, Channel selection and tl-wdr4310 A will not interfere with the channel (this example select 11), click "Save", as shown in the following figure.