Tornado Radio How to record

The first step: we have to determine whether our computer has a sound card, oh, open Device Manager, see the image below, if you do not have a sound card will have an exclamation point icon, these many people should understand (small series of reminders: sound card driver is best to choose some stable points, do not blindly pursue the latest)

Step Two: Make sure you have your sound card enabled for recording, access to the Control Panel-hardware and sound-sound-manage Audio Devices

Step three: Enter the recording label visible three devices, see "Stereo Mix", this is the use of sound card for internal recording, click the right mouse clicks "Enable"

(Note: Either the stereo mixer or the microphone listens under the Listening tab in its properties this device option is not open)

Fourth step: Turn on the Tornado Network radio, right click on the main window, in the pop-up menu select "Sound Recorder" into "Sound Recorder settings"

Fifth step: Here you can set the record file save path, format, attributes, recording equipment in the selection of stereo mixing, recording control, select the main volume, Lu Xian main volume, do not check the selected/mute, here can also adjust the volume of the recording generally pull to the highest on it, set good after the window can be closed

Sixth step: Click on the Recording button on the main window to start recording, click the end recording again

When the setting is complete, if the notebook is a microphone, then blow to the microphone, if you find a sound in the speaker, open the Realtek Manager (Control Panel-hardware and sound or system tray, in the Microphone tab after the playback volume mute, if not mute, The external sound received by the microphone is added to the recording

Note: If you are a desktop computer, you can skip the above step as long as the headset is not connected to the host when recording. So the recording process is set up, will it help you?