Toshiba notebook Win7 System into the BIOS Setup interface method

1, from the Windows Control Panel (except satellite 17xx,30/31,3000 series machine), launch the "Toshiba Hardware Setup" program, "Toshiba Hardware Setup" program provides a user-friendly graphical interface to modify the BIOS settings, here need to note that, If you change some settings, you must restart the computer before it can take effect. The Toshiba Hardware Setup program is pre-installed in the Toshiba notebook computer.

2, in the system to carry out the self-test process while holding down the ESC key (satellite 17xx,30/31,3000 series machine startup, hold down the F12 key, SATELLITE5000/5100/5200 series without DOS mode BIOS setup interface, only through the first way to set ), if you want to use this method, you must turn off the computer, suspend or hibernate is not valid, the specific method is: First press the boot button, and then quickly hold down the ESC key (you can also hold down the ESC key and then boot), and then wait until the system self-test, will prompt the user to press F1 key to enter the BIOS interface, This is the time to press the F1 key to enter the BIOS interface.