What is the Totolink router wifi setup URL? Totolink Router Wireless WiFi How to set up? First of all, to explain the content of this article, suitable for beginners, small white users to read, experienced users can completely drift.
Totolink Wireless wifi settings in the router is very simple, summed up can be divided into the following steps: 1, access to WiFi settings URL 2, login to the Settings page, 3, set wireless WiFi name and password.
First step, get wireless wifi settings URL
Totolink router's wifi settings URL, in fact, is the management of the page's login IP address, this address can be in the Totolink router at the bottom or side of the nameplate in the look, as shown in the following figure, The IP address is: 192.168.0.1, that is to say, the WiFi setting URL is: 192.168.0.1
View the Totolink router WiFi settings URL
Step two, log on to the Settings page
1, in the browser input: 192.168.0.1 and press the keyboard return button--> in the pop-up dialog box, "username" input:admin--> "password" input:admin--> and then click "Login", as shown in the following figure.
Log on to the Totolink router Settings page
Warm tips:
(1), Totolink router's default login username, the default login password are: admin, can be in the Totolink router at the bottom (side) in the nameplate found.
(2), if you enter the default user name, the default password, you cannot log on. The password for this totolink router has been modified and you need to enter a modified password to log in.
(3), if you have forgotten the password after the change, or you do not modify it yourself. Then the solution is to restore the Totolink router to the factory settings, and then use the default password to log on to the Settings page, and then reset the router networking to reset the wireless WiFi.
(4), if you do not know how to totolink router to restore the factory settings, you can refer to the tutorial: Totolink Router To restore factory settings method
Step three, set the wireless WiFi name and password
1, 2.4G wireless wifi settings
Click "2.4G Wireless Settings"--> Click "Basic Settings"--> settings "SSID"--> "Security Encryption" select:wpa/wpa2-psk--> Set "Key"--> click "Application"
Set the 2.4G wireless WiFi name and password in the Totolink router
2, 5G wireless wifi settings
Click "5G Wireless Settings"--> Click "Basic Settings"--> settings "SSID"--> "Security Encryption" select:wpa/wpa2-psk--> Set "Key"--> click "Application."
Set the 5G wireless WiFi name and password in the Totolink router
Note the problem:
(1), "SSID" is the WiFi name, do not use Chinese settings. Because some mobile phone, laptop wireless network card, does not support the Chinese name WiFi, sometimes can not find the Chinese name of the WiFi signal, or connect the Chinese name WiFi signal, the network is unstable.
(2), "key" refers to the WiFi password, it is recommended to use a combination of uppercase and lowercase letters + numbers + symbols, and the length of the password must not be less than 8 bits.
(3), "Security Encryption", must choose: WPA-PSK/WPA2-PSK, because WPA-PSK/WPA2-PSK is the most secure in several encryption methods, you can protect the WiFi password is not easily cracked.
(4), this article uses the Totolink N600R dual frequency wireless router to demonstrate, because is the dual frequency wireless router, therefore has the 2.4G wireless setting and the 5G Wireless setting 2 options. If you are a single frequency router, then only the 2.4G Wireless Settings option (Wireless settings).
That is, different models of Totolink wireless routers, the setting of the interface may be different, but the set of ideas are the same: Get WiFi settings url--> login to the Settings page--> set WiFi password and name.