Totolink Router to restore factory settings

This paper mainly introduces the method of restoring the Totolink router to factory setting. There are 2 ways to restore the Totolink router to the factory setting: 1, log on to the Setup interface, restore under the System Tools option, 2, and press and hold the reset button to restore the factory settings. These 2 methods have their pros and cons, the following will be introduced in detail.

Important NOTE:

Performing a restore factory setup operation on the Totolink router clears all configuration information from the Totolink router, including settings for Internet parameters, wireless WiFi password, and name. Therefore, be careful to choose whether you need to perform a restore factory setup operation on your router!!!

Method one, log in to the Setup interface, and restore under the System Tools option

1, in the browser input: 192.168.0.1 and press the keyboard return button--> in the pop-up dialog box, "username" input:admin--> "password" input:admin--> and then click "Login", as shown in the following figure.

Totolink Router's login page

Warm tips:

(1), Totolink router's default login username, the default login password are: admin, can be in the Totolink router at the bottom (side) in the nameplate found.

(2), if you enter the default user name, the default password, you cannot log on. The password for this totolink router has been modified and you need to enter a modified password to log in.

(3), if you do not know the login password, can not log on to the Totolink router Settings page, please use method two steps to the Totolink router to restore the factory settings.

2, click the "System Management"--> "System Configuration"--> continue to click on the right side of the "Restore" button, as shown in the following figure

In the Totolink router Setup interface, perform the Restore factory setup operation

3, in the pop-up dialog box, "OK", start to perform the Restore factory settings.

Click "OK" to start the Restore factory settings

Method Two, press the reset button to restore factory settings

In the Totolink router machine body, there is a reset button, labeled RST, Reset and so on. When the Totolink router is plugged in, hold down the reset button for 10-15 seconds, and then watch the router's LEDs, releasing the reset button when all the LEDs are off and flashing again.

Hold down the reset button: RST, restore the Totolink router to factory settings

Warm tips:

Some models of the Totolink router in the reset button, is a small hole, need to use toothpicks, nib, such as sharp objects, can operate!!!

Totolink Router Recovery Factory Setup Summary:

(1), using method one, login to the Setup interface, under the "System Tools" option to perform the Restore factory settings operation; The user must know the login password and be able to successfully log on to the Totolink router's setup interface.

(2), if you do not know the login password, you can not login to the Totolink router settings interface, you can only use the content described in method two, to the Totolink router to restore the factory settings.

(3), after restoring the factory setting, will clear all configuration information in the Totolink router, including the Internet parameter setting, wireless WiFi password and the name setting!

(4), restore factory settings, totolink router login URL is: 192.168.0.1, login username is: admin, login password is: admin