Tp link 802.11n Wireless Network Security: Configure WPA Encryption

Configure WPA encryption in tp link 802.11n to improve Wireless Network Security:

Currently, WPA is the safest way to encrypt wireless networks, and there are no solutions to this problem, so at the end of this article, I will introduce how to configure WPA encryption in the tp link 802.11n package to improve wireless network security.

Tip: In our tp link 802.11n package, the wireless router provides an encryption method named WPA/WPA2. However, this encryption method requires a RADIUS server, the purpose of using the RADIUS server for verification is not realistic for most of our families, so we will not introduce this too much.

Step 1: Enter the wireless routing device management interface. Then, select "Wireless Security Settings" under "Wireless Settings" to encrypt the wireless network. In the wireless security settings option select WPA-PSK/WPA2-PSK encryption, authentication type is automatic, encryption algorithm is also automatic, PSK password to add your own, the minimum is 8 characters, the maximum length is 63 characters. The update cycle of the group key must be 120 seconds by default. Save the modification.

Step 2: click "set wireless network for home or small office" in the upper-left corner of the scanning window with the wireless signal scanning tool in the XP system to open the "use wireless network installation wizard ", other operations are similar to the previous 64-bit WEP encryption. You only need to select "manually assign a network key" in "Create a name for your wireless network ", in addition, you need to select the "use WPA encryption without WEP" option below.

TIPS: As written by default in the XP system, WPA encryption is more secure than WEP, but some devices may be incompatible with WPA or do not support WPA encryption, this requires a detailed analysis of user issues.

Step 3: Enter the WPA-encrypted network key as required. The minimum length is 8 characters and the maximum length is 63 characters. The specific information should be consistent with the setting in the wireless router. Click "Next" to continue.

Step 4: After completing the setup wizard, we can see that the current computer has been successfully connected to "enable secure wireless network WPA)", so that our network transmission will become more secure.

TIPS: If you only want to temporarily connect to or manually connect to the WPA network, you only need to find the network to be connected in the scanning window of the wireless signal scanning tool of the XP system and then double-click the key.

Configuring WPA encryption in tp link 802.11n wireless network security is an efficient and secure method. You can practice it yourself and verify it before you can truly understand the security of tp link 802.11n wireless network.