Tp link 802.11n Wireless Network Security: WEP Encryption with a 128-bit key

How to configure the WEP encryption of the 128-bit key for tp link 802.11n Wireless Network Security:

In the encryption configuration method of tp link 802.11n wireless security, we have introduced the 64-bit encryption method, but its security level is not high enough, and it may be cracked by illegal users, therefore, we recommend that you use the 128-bit WEP Encryption Method to Improve wireless security for the sake of security.

Step 1 of WEP encryption Configuration: Enter the wireless router device management interface. Then, select "Wireless Security Settings" under "Wireless Settings" to encrypt the wireless network. In the "Wireless Security Settings" option, select WEP encryption and set the authentication type to "automatic". The WEP Key format is ASCII code.

Next, select the key type. Generally, 128 bits are used, and enter a custom key information. Here, we need to note that if you use 64-bit encryption, you need to enter 5 bits, if it is 128-bit encryption, you need to add 13-bit keys. After saving and exiting, the wireless signal sent by the tp link 802.11n wireless router will be encrypted by WEP and the encryption key is 128 bits.

Step 2 of WEP encryption Configuration: To connect to the encrypted network, you only need to enter a 13-bit encryption key during the connection. Of course, the configuration is as follows in the upper left corner of the scanning window of the self-built wireless signal scanning tool in the XP system when the 64-bit is configured, "set wireless network for the home or small office" opens the "use wireless network installation wizard ". yes.

Tp link 802.11n wireless network security 128-bit key WEP encryption configuration method is relatively simple, easy to operate, I hope you have understood, practice it.