Tp-link Router Installation Setup Complete tutorial

All kinds of routers hardware installation, basically is the same, about the installation of routers, not in this article discussion scope, you can refer to the "Tp-link home without wiring by installation and setting method."

However, regarding the router's function setting, each router's brand is different, also has the difference in the operation, for example Netcore route's setting may refer to "The Netcore route setup whole process", but today wants to introduce is the Tp-link router installation setting. Tp-link router is a very large number of routers, the quality is quite good. A lot of people like it.

The following is a detailed set up method:

1, the preparation of routers, cable, cat and other hardware equipment

The following figure is 1tp-link tl-402m

Fig. 1 Tp-link tl-402m

2, Tp-link router settings before the computer settings

If the line has been picked up. We open a good PC computer at this time. Open the Network Neighborhood properties (Picture 2), Local Area Connection properties (Picture 3), TCP/IP protocol properties (picture 4), set IP to 192.168.1.2 Subnet: 255.255.255.0 gateway : 192.168.1.1 (picture 5) determines that DNS is set up at the end of the configuration router.

Note: You can go to the Control Panel network connection to set up.

Take XP For example, see Figure 2 to Figure 5 for details

Figure 2 Opening the Network Neighborhood properties

Figure 3 Local Connection properties

Figure 4 TCP/IP protocol properties

Figure 5 Setting IP, etc.

Here to remind you, IP settings network segment can be set between 192.168.1.2-192.168.1.254 can be, do not set the same IP to multiple computers, which will cause IP conflicts. Remember.

Then you can open the desktop Internet Explorer, enter 192.168.1.1 carriage return, see picture 6

Figure 6 Internet Explorer with desktop open

Note, if the input 192.168.1.1 can not open the Web page How to do? Please see the "No line by the inability to login settings (192.168.1.1 Open) solution."

Here prompts the user name and password, the default username and password are admin, in the router instructions are also written. Enter and then press ENTER to enter the router configuration interface.

Note, the Tplink router default IP is basically the 192.168.1.1 password is basically admin.

3. Tp-link Router Setup

First access to the router interface, please see picture 7

Figure 7 Entering the router interface

Here we select the Setup Wizard. See picture 8

Figure 8 Selecting the Setup Wizard

Then next, see picture 9

Figure 9 Next

The choice of ADSL virtual dial-up, we are most of the choice of it, the other static that is the Green Line user choice, we do not do this in detail, know broadband users, railcom, Netcom and other virtual dial-up users, select it on the line, and then the next step see pictures 10

Figure 10 Next

Then click the next step, see picture 11, press completion to set up a good route.

Figure 11 Next

Then set in the DOT network parameters, WAN port settings, see picture 12

Figure 12 Network parameters

Okay, here's the configuration in the router. Everything is set up, now we only have to restart the router OK. Point System Tools, restart the router, after a few seconds, please see picture 13

Figure 13 Reboot the router

This time we turn off the configuration of the web window, the other computer can be connected to the Internet.

Note: Because this router's DHCP service is automatically opened, so you just connect PC computer, routers will assign IP, and so on to the computer, so the other computer basic need not set up, directly with the network cable to connect the router or switch to the Internet.

4, Tp-link router setup instructions

Of course, you can set up IP manually:

IP Settings Range: 192.168.1.2-192.168.1.254

Subnet: 255.255.255.0

Gateway: 192.168.1.1

DNS: Local telecommunications-provided DNS can be set, with preferred DNS and alternate DNS

If you do not know the local DNS address, you can also set the preferred DNS to 192.168.1.1 is the gateway, the standby need not fill.