TP-link home wireless route settings and ADSL settings

This article introduces the TP-link home wireless route settings and ADSL settings, and introduces how to set home wireless route settings. Many people may not know how to set home wireless route settings, it doesn't matter. After reading this article, you will certainly have a lot of GAINS. I hope this article will teach you more things.

Recently, I helped my friends connect to install the ADSL Broadband Internet. Considering that they are using laptops and pulling Network cables at the same time, they also increased their physical labor and simply bought a Wireless Broadband Router, which is convenient for me, also convenient for them; refer to the new egg shopping network price after buying a TP-Link TL-WR841N Wireless Broadband Router, the route can support the latest 11. n wireless network protocol, the fastest speed to reach the LAN wireless transmission rate of mbps; TP-Link is also well-known in China, the price is very good, the price is cheap and sufficient, this wireless route cost only 200 RMB, which is also the cheapest among the 11N wireless routers.

Not to mention, presumably many of our friends will also use the home wireless route settings of TP-Link. Let's look at the route below: The price is cheap, and the packaging is also very common, no gorgeous appearance. The package contains a TL-WR841N wireless router, a power adapter, a manual and its warranty card, the route itself warranty for 12 months, power adapter warranty for 3 months;
◆ PWR indicates the power indicator.
◆ SYS indicates the system status indicator, and its blinking indicates that the device works normally;
◆ WLAN indicates the wireless status indicator. Flashing indicates that the wireless function is enabled. If the WLAN is disabled, the wireless function is not enabled;
◆ 1 ~ 4 is the LAN status indicator. Flashing indicates that the host network connection of the LAN port is normal;
◆ WAN indicates the WAN status indicator. Constant and blinking indicate that the WAN is working normally, and blinking indicates that data exchange exists;

 

Home wireless route settings

The lock head light is the safe connection indicator light. The green flash indicates that the secure connection is normal, and the red indicates that the connection fails. The connection of the vro is simpler. Take our forum as an example ~ First, the adapter is plugged into the mains, and the other end is inserted into the power port at the rear of the router. If it is not switched, power-on begins to work. Turn on the laptop wireless Nic switch, and then you can find the wireless signal from the router in the wireless network management of Windows.

 

Home wireless route settings

The network cable output by the adsl modem is inserted into the WAN port of the router! Everything is that simple! When the power of the wireless router is switched on, the router is in the working state. Enable the wireless switch of the laptop, make the wireless network adapter work properly. You can see the Windows Control Panel-network and sharing center-connect to the network window, and you will be able to automatically find the vrossid's SSID name (in the red box)

Note: The wireless and DHCP functions are enabled by default when the wireless router is enabled. If you use a LAN network port to set a router, you need to set the IP address segment of the Computer nic and the vro in the same segment to access the router!

 

Home wireless route settings

Double-click the SSID name and wait for a moment until the wireless network card is connected to the vro. After correctly connecting to the route, you only need to click IE browser and enter 192.168.1.1 Username: admin Password: admin in the address bar to enter the setting page of the TP Link router. The user name and password are labeled at the bottom of the vro. Please note that all vrouters of the brand are actually designed in this way, but the initial IP address and user name may be different. After everything is correct, this is where you are.

 

Home wireless route settings

Click "Next" and select "ADSL virtual dialing (PPPOE)". Then, enter your internet account and password. Next, you generally connect to the home broadband network, most of which are based on the ADSL dialing method, from here, we will introduce the configuration method using the ADSL method. After Entering the vro setting screen, click "setting wizard" on the left and click "Next" as prompted ", set the connection mode.

 

Home wireless route settings

 

Home wireless route settings

Select the PPOE mode for ADSL. Next, enter your ADSL account name and password (case sensitive). After OK, click Next to go to simple wireless settings, wireless "enable" and SSID name (this name is the name of the wireless signal you have searched for this route). The other default values are: Next, OK! Done! If you do not need other functions related to home wireless routing, click "restart vro" for the "System Tool" of the wireless router. After the router is restarted, set it correctly, then you can access the Internet by dialing.