Tp-link How to use Mac binding to restrict Internet users

Tp-link using Mac binding to restrict Internet users tutorial a

The common way to share the Internet is: Telephone line-Voice separator-ADSL cat-Broadband router-switch, hub-computer. In this case, you can restrict access to the Internet by setting the broadband router appropriately.

Take Tp-link tl-r402m As an example, the specific steps to restrict access to the Internet are as follows.

First, obtain the IP and MAC address of all users in the LAN

View your own computer IP and mac:win+r, input cmd, view with Ipconfig/all; Use the LAN view tool to view MAC address: win+r input cmd, view with nbtstat-a IP address,

Second, landing broadband router

Open IE, enter the 192.168.1.1 login window, account: admin, Password: admin, the default is this, after landing will appear broadband router Settings page.

Third, do not allow a computer to the Internet settings

(1) Settings page-Security Settings-Firewall settings-Choose to open the firewall, turn on the MAC address filter Two-prohibit the set of MAC address list enabled MAC address Internet access.

(2) Set page-Security Settings-mac address Filter-Add new entry-put the MAC address of the computer that is not connected to the Internet and choose to make the entry effective.

This setting, the computer is not allowed to surf the internet, but the internal network can be normal access between.

Only allow your own computer to set up the Internet, other computers want to surf the internet is more difficult, unless the intrusion router and change settings outside.

Four, only allow their own computer access to the Internet settings

(1) Set page-DHCP server-static address assignment-bind your IP address to the MAC address, enter and save it

(2) Settings page-Security Settings-Firewall settings-Choose to open the firewall, open IP address filtering, open the MAC address filter three-select general does not conform to the set IP address filtering rules of the packet, Disables access to the Internet through this router and only MAC addresses that are enabled in the list of established MAC addresses.

(3) Set page-Security Settings-ip address Filter-Add a new entry-Put your IP address in and choose to make all entries effective.

(4) Set page-Security Settings-mac address Filter-Add a new entry-put your MAC address in and choose to make all entries effective.

This setting, in addition to you no one can outside the network, but the internal network between the normal access.

In fact, the internal network can be normal access between the role is not, this method of limiting traffic is mainly rely on the built-in firewall functions to achieve, very convenient.

Tp-link using Mac binding to restrict Internet users tutorial two

First, open any of the IE browser in the address bar to enter the router's management address, the default is 192.168.1.1, enter the administrator password after entering the main interface.

In the menu on the left side of the window, click Wireless Settings to select Wireless MAC address filtering in the list, and then click the Add New Entry button.

Refer to the example on the right in the MAC address bar to enter the binding device MAC address, the description can fill out the name of the device, the name of the device owner for marking, after the completion of the save.

After you add success, you can continue to add or edit the status and description of existing entries, depending on your actual needs.

This wireless network is not available for devices that are outside the Mac list and the state is not "in effect", even if you tell him the password.