TP-LINK NVR supports the standard ONVIF protocol and can be used with IPC (network camera) of different vendors that support the ONVIF protocol.
Setting method
1
And connect the IPC to the network.
Connect the IPC, NVR, and client computers to the network. As shown in the following figure:
2
Activate Haikang IPC
Generally, activating IPC is to configure a management password and an IP address for IPC (the default value is the same ). Take Haikang IPC as an example. During the first use, NVR of other brands cannot be directly used for automatic discovery configuration. You need to activate the IPC first, that is, to configure parameters such as the management password and IP address for the IPC.
If you are not clear about how to activate Haikang IPC, contact Haikang technical support.
Note:Some manufacturers do not need to activate IPC, and the IP address can be automatically adjusted to avoid conflicts. You can skip this step.
3
Use TP-LINK NVR to configure Hikvision IPC
Connect the display and NVR using the VGA connection line to log on to the nvr gui. On the preview page, right-click, right-click, and click
Main Menu> Settings> Camera Settings> channel accessThe IPC is automatically found in the device to be added. Click
Add, As shown in the following figure.
Enter the management password set when activating Haikang IPC, and click
OK, As shown in the following figure.
Added successfully. You can view the connection status of the IPC in the added device.
You can view the image on the preview page.
If there are other Haikang IPC, all operations are performed in the same way.
