Tp-link Power Cat and extender how to match

First, plug the Power cat and the Power cat extender into the power outlet, as shown in the following figure.

Second, the power cat router led often light, click the Config key, the LED will flash, as shown in the following figure.

Third, in two minutes, and then click the Power Cat extender in the Config key, as shown in the following figure.

The LEDs also flash as the Extender presses the config key, as shown in the following figure.

Four, about 30 seconds later, the Power cat and the Extender led are changed to illuminated steady, so that the power of the cat and the Extender paired successfully.

Other brand power cat pairing method and the above method is the same, we need to learn to extrapolate. In general, the Power cat and Extender can be connected by wire, no network cable, this feeling is still very tall.