Tplink client mode how to set

Tplink Client Mode setting method

1, Run the Setup wizard: Enter the router's management interface, click the "Setup Wizard"--> click "Next".

The Setup Wizard for the tl-wr720n router

2, select the mode of work: Here you need to select "Client Mode"--> click "Next".

On the tl-wr720n router, select client mode (clients)

3, Scan signal: Click "Scan".

tl-wr720n router scans for wireless signals

4, in the scan results, find the main router's wireless signal name (SSID)--> click "Connect."

tl-wr720n router connects to wireless signal

Note: If the corresponding signal is not scanned, verify that the primary router is switched on and try to reduce the distance between the routers.

5, enter the wireless key: "Key Type" Please select the same type as the main router--> "key" Please enter the connected wireless network password--> Click "Next".

Set Wireless password

6, restart the router: Click "Finish"--> will pop the restart prompt dialog box, click "OK" again.