Tplink routers how to set up bridging

the method of Tplink router to set up bridge

First wireless router settings

1 login and Broadband cat connected router: Figure

2 set the fixed channel number in the wireless setting-Basic setting, "SSID number", "channel", as shown in figure:

3 Setting up wireless signal encryption information in wireless settings-Wireless security settings

Log the SSID, channel, and encryption settings information after the wireless router is set

Second wireless router setup, login to second wireless router

In the network parameter-lan port setting, the modification IP address and the first router are different (prevents the IP address conflict), like 192.168.1.2, saves, the router automatically restarts.

Check "Open WDS" in the Wireless settings-basic settings. Click "Scan" to search around the wireless signal.

Select the first router SSID in the list of scanned signals, the SSID in the following figure, and click Connect.

Sets the channel to be the same as the first router channel. At the same time set the encryption information and the first router is the same, click "Save". The following figure,

Shut down the DHCP server. At the DHCP server, select Do not enable, save, and restart the router.

WDS was successfully established by the first wireless router and the second wireless router at this time.