Tplink Wireless Router wr700n how to set

Tplink Router wr700n setting method

1, first with a network cable to connect the computer and tl-wr700n "Lan/wan" network, if the wireless has been connected without network cable. And then plugged into the power outlet:

2, because this router default IP is 192.168.1.253, so if your network does not start with 192.168.1, the general need to manually change the IP. Right-click My Network Places and choose Properties:

3, and then right-click "Local Area Connection" or "Wireless Connection" and select "Properties":

4. Select Internet Protocol Master (TCP/IP) and click the Properties button:

5, and then the IP into 192.168.1 network segment, such as 192.168.1.111, the last Way "OK" can be:

6, then open the browser, in the address of the input 192.168.1.253 press ENTER, enter the correct "username" and "password", click the "OK" button:

7. Automatically eject the "Setup Wizard" and click "Next" button:

8, switch to the "working mode" step, select the first "AP" option, click "Next" button:

9, switch to the "Wireless settings" step, in the following "SSID" to enter the SSID you want to set, and then select the following "Wpa-psk/wpa2-psk" and enter the password, click the "Next" button to continue:

10, then switch to the final step, prompted the need to reboot, directly click the "Restart" button to restart the router:

11, and then reconnect the wireless connection "Properties" to automatically obtain the IP mode:

12, then turn on the computer wireless, search for wireless, there should be this wireless signal and have an encrypted logo: