Tplink wr702n How to set

Step one, tl-wr702n router installation

Telephone Line Internet: Please prepare 1 short network cable, cable one connection ADSL Moden (cat), the other end of the tl-wr702n router to connect the Lan/wan interface, as shown in the following figure.

TL-WR702N Router Installation when telephone line is on the Internet

Light brazing: Prepare 1 Short network cables, one to connect the light cat, the other to connect the other end of the tl-wr702n router to connect the Lan/wan interface, as shown in the following figure.

TL-WR702N Router installation in light brazing

Internet network: Directly to the broadband operators to provide household network cable, inserted in the TL-WR702N router Lan/wan interface, as shown in the following figure

TL-WR702N Router Installation When the net cable is in the household

Step two, set up the computer IP address

Before setting up the tl-wr702n router, you need to set the IP address of the computer to be automatically obtained, which refers to the IP address of the wireless network card on the notebook computer. (PS: If not set, please click to read: computer automatically obtain IP address settings method)

Computer set to automatically obtain IP address

Step three, wireless connect to the TL-WR702N router wireless network

The computer searches for and connects to the TL-WR702N router's signal (the router default SSID is: tp-link_xxxxxx (six digits behind the MAC address) to view the MAC address on the router's bottom sticker.

A wireless network connected to a TL-WR702N computer

Step four, log on to the TL-WR702N router Setup interface

Open the computer desktop of IE browser, empty the address bar and input: 192.168.1.253 (admin address), enter the page will be pop-up login box (ps:192.168.1.253 can not open?) please click to read: 192.168.1.253 open Solution

Enter 192.168.1.253 in Browser

In the Login password box, enter the default management password for the router: admin, click Login, and enter the admin interface.